Mounting Dream TV Wall Mount for 32-65 Inch Television,Mount with Swivel and Tilt, Full Motion Bracket with Articulating Dual Arms, Fits 16inch Studs, Max VESA 400X400 mm, 99lbs, MD2380

Works really well. Had a 40 inch TV on it and upgraded to a 65 inch tv. Was a little nervous about its ability to hold it since I was pretty much red-lining the rating for it. After about four months with the 65in TV, the mount is holding up surprisingly well. For the price, it's pretty strong, easily adjustable, and easy to mount.

This mount is excellent. It perfectly fits a standard 16 inch stud spacing, but no more than that. The outer most holes for the stud mount go out to only 16 1/4 inch, and have slotted holes for the smaller stud spacing. More specifically, I bought and mounted this for an LG G5 Series 55” OLED. Not only does it fit for this specific TV, but it also has room for adjusting it up and down, sliding left and right, and allows the TV to come out and inwards using the extendable hinges. I do like the little bubble level it comes with, it’s nice to keep and save in my office desk, for little nuance projects. Only thing I wish it came with, were 4 washers for the lag/stud bolts. The surface area that the bottom of the head of the bolt, doesn’t seem to have much contact area for my liking. So I added 4, 1 inch wide washers to give the bolt more area to clamp the mount and spread the load across the slotted hole. Other than that, with a little measuring and thought, this mount was extremely easy to install. Do take the time to see how far up or down you want mount the long black mounts that actually attach to the TV. Other than that, it’s still holding up great. Before I mounted my TV, I grabbed a bathroom scale, and while i stood on it, I pulled more of my weight onto the mount, and I wanted to confirm it would hold 100 or so pounds. It did so very well, felt and sounded sturdy at about 140 pounds. This manufacture does state 100 pound limit if I can remember correctly. So just keep that in mind.

This was quite slick to install. Only thing to be aware of, it’s about 16” wide, so if your studs are not centered right around the spot you want your TV mounted, you may want to either hit 1 stud and drywall anchor the other side (not what they recommend but probably ok if your TV isn’t very heavy) or do what I did and run a couple 1x4s across a few studs to give you a solid base to mount this into. But mounting it and hanging the TV really was very easy. I am really happy with it - it’s rock solid, has a really wide range of motion, pulls out from the wall quite a long ways, and can turn quite far, too, which makes it easy to reach all the sockets and ports in back.

This wall mount is very good and This is the 3rd time we have bought this mount and used it. Had a friend helping me on this one and he is an it person and all he could say was how well it was built and how much flexibility we have with the TV. Well worth the money and easy to install.

This mount has increidble reach and is very solid. As a comparison my other primary TV mounts are the Mount-it Beast (also very long arms but dual). I needed this for a very unique mounting scenario. See images attached, but I was able to cut the main wall bracket to fit between windows, while still hitting two studs. Why four stars? Very small maount of slop or sag due to the lenght of the arms, and it being a single arm mount. It's not a big deal and I persnoally have really high expectations for this type of movement, however it does cause you to need to relevel the TV with any major movement of the arms. I don't think this a is a flaw necessarily of this specific mount, and rather just a symptom of the mount being an extremely long single armed mount. The pivot feature and mounting hardware all works great.

At this price point, my expectations were fairly low for the Mounting Dream MD2380 articulating TV wall mount bracket. Much to my surprise, this wall bracket is a robust, well engineered, quality piece that is on par with similar TV wall mounting brackets costing 3 or 4 times as much. The instructions are simple and clear, and the whole installation process is very straight forward. MD even includes a bonus bubble level, a braided 6' HDMI cord, and enough machine screws and spacers to fit the TV mounting brackets to practically any TV on the market. It took me a little over 20 minutes from opening the package to having my 55" 4K TV securely mounted to the wall. The unit is designed to allow you to adjust your TV to sit flat against the wall (with an approx. 3" space) or pull it over two feet from the wall for angling. When extended, the TV can be angled left or right up to 35 degrees and you can also adjust the vertical picture angle from +5 degrees to -15 degrees. An added bonus is the articulation makes it MUCH easier to add components to your TV at a later time. Flat wall mounts require you to remove the entire TV to access the back panels. The unit feels very sturdy and can be moved with a nominal amount of effort. The packaging says this wall mount is rated to hold up to 100 lbs., but when mounted properly, my guess is it could handle at least twice that weight with ease. I highly recommend this product and I am writing this review because I came back here to order two more for our other flat panel TVs. If you are going to buy this wall mount, and trust me, you won't regret it, read on for a brief primer on how to install it. Installation experience: Before opening the box, you will need a cordless drill/driver, a 3/8" drill bit, a measuring tape, pencil, a ratchet with a 12mm socket, a #4 phillip's head screw bit and a stud finder. The instructions say you can mount this bracket to sheet rock studs or cinder block, but not to straight sheet rock. Makes sense as even with sheet rock anchors, the bracket will eventually pull from the wall if the articulation function is used as intended. The first step is to locate what wall you want to mount the TV to and then use your stud finder to locate the studs that you will be anchoring the bracket to. I found that the easiest way to get a nice level mounting was to use the mounting template with the included bubble level. Once level, simply tape the template in place and then drill the four mounting stud holes right through the template. After removing the template, place the wall bracket against the wall, line up with one of the upper holes you just drilled and use your ratchet and socket to drive the first bolt in until it is almost tight. Leave some play so that you can align the other three bolts and do the same with each. When all four bolts are in place, go back and finish tightening them securely. Attaching the TV brackets is really easy with the plethora of machine screws and spacers included with the kit. Once the TV brackets are attached to the back of the TV, find an assistant (depending upon the weight of the TV - this will be a two person job) and place the TV on the wall bracket. You will here it click in place. There are two included screws at the bottom of the TV brackets which are used to lock the TV to the wall bracket. Make sure these are tightened so you can safely use the articulating feature. Plug in your cables, fire up the TV and Voila! You can now sit back and enjoy your TV from practically anywhere in the room with a perfect picture angle.

Easy to mount. Instructions complete and easy to follow. Hardware kit was adequate. Quality is nice.

I’m always hunting for that rare creature where smart design, solid materials, and a completely reasonable price all shake hands and agree to work together. This mount is exactly that. Installation was refreshingly simple. The hardware is stout, the instructions actually make sense, and once it’s lagged into studs the thing feels like it could hold a small rhinoceros, not just a TV. The tilt function is smooth and useful without adding unnecessary complexity or wobble. In other words, it does exactly what good tools should do: disappear into the background and quietly do its job for years. If you believe in spending money *once*, installing it properly, and then forgetting about it forever, this is a fantastic buy. Made from heavy and thick steel but yet simple, affordable, and engineered with just the right amount of practicality. Five stars from the Department of Sensible Spending. ⭐⭐⭐⭐⭐

good finish easy to install and sturdy

I am really pleased with this mounting kit and highly recommend it to anyone needing one for a 26-55" TV wall Mount. There are a few different kits available depending on the Wall Stud Distance and one or two arm mounts. I choose the two arm mount 16" Spacing kit. Like always shipping was free and really fast to my small remote town via Canada Post. Very pleased how fast it came. It was nicely packaged and when opening it, I found everything nicely labeled and packaged nicely. The instructions with the kit were really well done I feel, and easy to follow. Some of the Bonus Features I found were: 1) Included a really nice HDMI Cable 2) Includes Not Only a Wall Template but a small Bubble Level to connect to the wall template, but also a larger level for other leveling needs. 3)Contains handy velcro straps for cable mounting. Mounting the wall mount was pretty simple, I found where the studs were on the wall and marked them with a pencil, I then found the right position for my mount using my markings and the included template. It includes a small level you mount to the template and this allows you to get it nice and straight. I then predrilled the mount holes and removed the template. I was painting the wall, so did found the locations and predrilled holes before doing drywall repairs/painting, just in case. When the time came to mount the wall mount, I used the included lag bolts and put them into the wall studs I pre drilled earlier. You use the included larger level to get your wall mount just right and then tighten in the bolts. The kit comes with a good selection of bolts, spacers and washers to mount the mounting pieces to your actual TV. I found I needed longer bolts, but the spacers etc worked perfect. Just lift the TV up now and attach it onto the wall mount. Once on, tighten the lock screws and its on there good. You can then make the adjustments like tilt and any fine tune straightening. I really like how well this kits is made, and all the included things to make installation as simple as it could possibly be. Being able to pull the TV Away from the Wall and move at angles if we are out on the back deck is really handy and moves smooth. I would highly recommend this kit to anyone needing one, it really made installing my first TV wall mount a breeze and I feel comfortable with my TV hanging on it.

Very sturdy. Easy to install

I used this for my living room TV. Mounted pretty easy. The instructions and all the included accessories make this a fast and clear process. I would recommend and buy again.

Excelente calidad y funcionalidad.