Curt Manufacturing 45006 ATV Receiver Adapter

On my 2009 yamaha wolverine 450 4x4 the oem hitch was recessed back between the tires so I couldn't turn with a trailer or tongue would hit preventing me from turning. This fixed that by bringing my hitch out. It points down a bit on my machine but still works great I might bend it in the future so it looks better and more level but it doesn't seem to effect how well it works.

This ATV attachment is manufactured with quality heavy duty materials and the welds and fabrication is excellent. We upgraded the hardware just because that’s just what we do. Should last a lifetime.

By handy, I mean this thing can allow you to do a lot of things with your ATV. I do agree with some of the concerns, you need to watch out for how it can swivel; there is a bracket included to help with this. To be honest, I don't know what kind of bolt-on, universal design would help this much more than what is included. You can always tack weld it- but for out of the package use, this thing was up and usable in no time. Do not try and change the ball on your receiver while it is in this thing... I have to change/tighten receiver hitches while it is in my truck receiver. The force of a wrench will turn this puppy in no time. Please note that if your receiver accessory/hitch is not angled at the back, it will probably hit the bolt and not clear for your pin. This is the one problem area- one that could put you in a bind if you have more than a hitch to put on. The reece 2" receiver hitch I have works great because it has a 45 degree angle in the rear. The straight cut, 2" receiver hitch I have (I do not see a brand) does NOT fit. I have this mounted on a polaris ATV. I don't see why it would not work on any ATV that has a place to put a hitch. This helps me to pull trailers because I actually have a 6X6, Polaris Magnum. Without a receiver, I easily hit my tires when making a turn. This puts the trailer a little further back, between the adapter and the actual receiver hitch, it is 12". This also will negatively affect very heavy tongue loads and is something I must watch. The further from the axle the hitch is, the more force is applied (similar to a lever idea). All-in-all, I think this a great product. Well-made, sturdy. Don't expect it to do something that is impossible.

Worked out on my 4 wheeler

This product works as expected and allows me to attach a 2” receiver to our ATV. This gives us more versatility on the ranch for attaching a ball hitch to pull that type of implement. Only small issue is that the hitch mount will slightly rotate after use due to the fact there is only 1 mounting bolt. I’ve torqued it down well, but still have this issue…one for the mechanical engineers to figure out :)

I bought this for my John Deere 1025R sub compact tractor. The tractor has a bolt on plate with existing holes to bolt on a ball or other devices. I thought this would be perfect. Curt products seem pretty well known. I felt confident the parts would be robust. The unit seems well made like I expected. I was nervous about the reviews about the hitch rotating. I certainly didn't want that. Took a chance. Because the plate on the tractor had a larger flat spot compared to ATVs so I thought I'd rotate the v-shaped plate to use the flat end instead. Well that didn't seem to help much. I tightened all the hardware really tight but that didn't help. I think this think is going to twist. I also had to shorten the shank because it hit the bolt head and I couldn't install the pin thru the receiver. A quick cut job with a sawzall and that was fixed. I'll see how it goes but I'm thinking more work will be required. 3 stars for well built and ease of assembly but drop of 2 stars because it probably will rotate.

This will work perfectly for attaching scrape blade to pull behind four wheeler. Good quality

I have a Honda Rancher ATV that has a slight design flaw. If I was to install a ball hitch on it, the ball would be almost under the plastics on the ATV making it very dificult/awkward to put a trailer on it. This adapter turned out to be a perfect answer for that. First of all, the price was perfect. This little problem could have potentially cost me up to $75. Secondly, it's well made and will last as long as my quad. Third would be the two inch receiver. It's the same as my Jeep making it a quick swap back and forth. Four thing, the loop on the top is a great bonus. It doesn't look like it would add much as far as length, but you must consider the length of the ball hitch adapter which is about 9 inches. Put together you add roughly 10" in length so it's not as difficult to put on the trailer. I would buy this again if I needed it and would highly recommend it. Great purchase!

Don’t “save” $10 buying a cheaper one , this Curt is the real deal . They might look the same but they aren’t . This is a serious piece of kit that will last my lifetime and pull more than the specs say it will . If you’ve never seen one fail under pressure , save yourself the trouble and possible injuries by buying the Curt . Cheap knockoffs are made of cheap metal . Also , the anti twist plate prevents serious side to side movement . Unless you weld the adaptor on you will ALWAYS have some play with these ,it’s expected , but the plate makes a big difference . Also it comes with the hardware , which is also built within the tolerances needed to withstand REAL needs . Aside from pulling other atvs and myself out of sticky wickets , this thing needs to yank trees out of the ground , pull heavy machinery around etc , and I trust it will . The powder coating is very nice too ! We will see how it holds up .

Works well, very happy with purchase

Apenas lo probaré, actualizare el review cuando vea el resultado, si se empieza a mover tendré que devolverlo

Thank you, this ATV coupler is just perfect, extremely well made and presented, well packaged and arrived way quicker than expected

Fit perfectly on my Honda Rubicon, attaching where the ball would be installed. Combined with the Curt 2" hitch extension it provides options to tow different equipment like toboggans and tub carts along with connect points for attaching tow straps, etc. Also extends the towing connect point back from the tires, eliminating equipment from rubbing against the tires when turning sharply or backing. Curt makes excellent, solid products.