Speedrocker Fender Set

On my Trek Domane+ I can swap out wheels and tires to make it both a road bike and a gravel bike. Unfortunately, Trek fenders cannot accommodate 40mm tires. I tried these SKS fenders and they are a perfect fit with a consistent tire to fender gap as if they were made for the bike. On the wet roads they provide great coverage. The set up is easy and I imagine they can accommodate a wide variety of bike brands.

Added these to my Specialized Roubaix and they were about 30 minutes to install and adjust, but are quite effective. A number of messy winter rides later and I am much dryer and happier. Fun fact: front fender flips up a bit to make room for the wheel stay of my Kuat hitch mounted bike rack.

The order arrived quickly from Amazon but missing a critical part. Called the company on the shipping label to find out how to correct the missing part. They said "sorry, the order was fulfilled by Amazon so you need to call Amazon". Amazon was great. They offered to replace the whole order no charge as long as I sent back the first order within thirty days. They e-mailed a return shipping label so I wouldn't pay shipping. The second order arrived a few days later. This time missing all the small parts to connect the fenders to the bike! Between the two orders I was able to get the fenders installed. Returned what was left of the first order to Amazon. I love the fenders. They work perfectly on my bike which doesn't have it's own fender mounting points. Installation was pretty easy once I had all the parts. Good luck!

I've ridden years with SKS Raceblade fenders on road bikes with tires up to 29mm width. This year I purchased their SpeedRocker model for my Orbea Gain M30. It is shown here with 37mm tires (35mm Schwalbe G-One Speed TLE on 622x700c Astral Wanderlust rims). I am very pleased. They are firm, no shifting, no rattles, not even when crossing washboard on gravel. Good tire clearance. No issue with interference with toes of my shoes, even with insulated winter road shoes. Tire coverage and protection for the bike and rider on wet dirt and through puddles is excellent. To achieve proper function they must be careful fit. Nearly every part is adjustable. The stays are supplied extra long, to be cut to just over proper length, then adjusted at their insertions. Observe the torque recommendations: 1 Nm on the stay insertions, 3 Nm on the pivots (2mm Allen wrench). Note that I applied 3M Scotchgard vinyl protective tape where fenders mount to fork and to seat stays, and that I used a white marking pencil to record proper locations. Tape and white pencil were purchased from Amazon. I found enough clearance to place the left side rear mount below the disk brake. The rear fender has a telescoping extension bringing coverage down to the lower end of seat tube, where it too fastens with a rubber strap. Front fender is a two part affair which is tricky to assemble, but secure once done. It does depend on Velcro. Hook & loop fasteners can deteriorate as loops tear with each removal. I plan to leave my fenders on the bike for the entire rainy season. Probably zip ties (cable ties) can also be used, as with the SKS Raceblades.

I decided to buy these SKS SpeedRocker fenders to add to my winter bike. They seemed to fit the bill correctly as they are marketed for gravel type bikes with wider tires. My winter bike here has 38mm tires. Mounting the fenders with the supplied mounts and brackets is pretty straight forward and it took me about 20-25 min (going slowly) to get all adjusted and whatnot. I initially mounted them with all the supplied seat stay and fork bracket mounts but frankly didn't care for the appearance of the fender stays with supplied mounts. (pic attached). My winter bike thankfully has threaded eyelets for fenders. Simply removing the fork and seat stay bracket allow the fender stay to be directly mounted to my frame. (Pic attached). I never rode the bike with the factory mounts on the stays, but will note they seemed rock solid and feel it would have been no issue whatsoever. For my application I just prefer the cleaner fixed mount look. I would still use 100% if I hadn't had eyelets. My first "wet" ride I set out on a cold wet day for a 50-60 mile road ride just post rain. Roads were wet but not actively raining. Front fender was surprising good. I was torn about having that "in front" of fork fender attached but it performed wonderfully. My smallish issue with the front is it really needs a small rubber mud flap at bottom. Clearly water runs off the bottom and at reasonable speeds (20'ish+) water deflects from the bottom right onto toes. I did have shoe covers on but were wet within a few miles. Here now is why I give them a 3 Star Rating. The rear fender has that nice sliding extension piece to make a more custom fit where it intersects with your seat tube. This is the biggest flaw for my set up. From my set up and nearly every picture I could find on-line shows the rear fender intersecting the seat tube about mid water bottle mount area. When in real world usage, water flows heavy off this area right onto to the top side of your foot/ankle/shin area. I had mid weight shoes covers on and they were soaked within about 6 miles into my ride-not good on a 37 degree day (again not actively raining, and just wet paved roads post rain). I will 100% have to rig up some piece of plastic to make the water run off further down the tire by the bottom bracket vs my ankle. For $80 I feel I shouldn't have to make chintzy DIY additional deflector. Had this front portion extended a few inches more down these seat tube these would be awesome. Several reviews stated water spray off the rear as they claim rear was too short in back. Honestly I didn't see that, however I really wish SKS would offer as an accessory or include a rubber mud flap extension to deflect/diffuse for both front and rear. I see there is a rear extension piece offered but doesn't appear of be available in US. All and all I still highly recommend these, just forces me into a few DIY projects to improve.

Product arrived damaged and missing installation parts.

I liked the quality of the product, my bike looks great with them. The install was relatively simple, although the instructions were not very explicit. I have ride only once with them, and no noticiable noise or shaking. Great product, would buy again

I bought these for use on a Specialized Creo. They fit great, were easy to install and seem well made. So far they have done a great job of keeping mud and debris from spraying on to me or my bike!

Produit très qualitatif et le montage très facile . Attention si vous avez des freins a disque sur devant cela peut gêner au montage.

Best of the best!!! Jätte nöjd, tyska grejer på riktigt!

odejmuje 1 gwiazdkę bo jeden błotnik jest zakrótki i jesteś ochlapany wodą deszczową

Ottimo prezzo. Si trova anche da decathlon. Montate su CANYON PATHLITE 7. Perfetto.

Estos guardabarros únicamente sirven para bicicletas tipo carretera/gravel hasta 42mm de rueda PERO CON FRENOS DE DISCO. Al no estar especificado en la descripción, los he comprado por error y he tenido que devolverlos, ya que mis bicicletas tienen frenos de llanta.