AGFRC B11DLS 2.8KG Micro RC Servo Kit, 2-Pack

Excellent quality servos for the money

Stock servo started acting erratic. This servo fits perfect on my TRX4M Bronco, wire is long enough to reach ESC. Definitely faster and stronger than the stock servo.

Very good servos! The dimensions are correct. They function perfectly in my Popwing.

Got these on the advice from a couple guys on the web as they supposedly have 180° travel providing maximum elevator travel for maximum maneuverability. I installed these as suggested and on first takeoff one of the servos stripped, one elevator went the direction it was supposed to, the other did not and the plane crashed so hard I'm not sure its reparable. These are supposed to be really good servos but in my experience, not so much.

I have bought about 20 of these servos for Rastar 1/14 scale car conversions and my Tamiya trucks. For a small size they have a lot of power and only one failed so far.

Used to replace comparable spec'd Spektrum servo that had more fragile plastic gearing. AGFRC servo is very smooth running not "steppy" nor jittery in travel with virtually no gear backlash. Good centering force. Only shortcoming I found was that the fit of the servo arm hubs over the output shaft spline was extremely tight and hard to press on so it didn't earn the 5-star rating from me. Hopefully, they are not stretched so much that the arm hub develops a split with age.

I used the servos for my Turbo Timber Evolution's two wing servo's that were starting to twitch. So far they are holding up very well and they are quiet compared to the original servos. I am unsure of the waterproofness. WARNING UPDATE 12/20/2023: These servos last about 4 months before they start to malfunction. I was flying my plane and making a hard left bank and the next thing I know the left aileron servo has gone out. The aileron was stuck in the fully up position but somehow, I managed to land it with only breaking the prop. After close inspection of the servo I noticed the internal (non-metal gear) was worn.

The quality appears to be outstanding and I wish they were clockwise rotation. They are not a direct replacement for AR381, control surfaces on Carbon Cub S2 are all backward. This can be resolved by reversing servo settings on most radios but SAFE and AS3X are backward even if reversed. I considered opening them up to switch motor and pot wires, however pot is directly mounted to control board.

Used on my Turbo Timber Evolution as the rudder servo packed up

One of the servo stop working just after installed

All i can say is stick with ebay!!!

I used it as a steering control for 1:10 crawler and after 20 mins of using the servo gears started to slip. After inspecting the internal gears, one is made of plastic which breaks easily.

Conforme, livré très rapidement