Z-FIRST 2Pcs Solid Tires 8.5 Inches Electric Scooter Wheels Replacement Tire 8-1/2'' Front or Rear Honeycomb Tires for Xiaomi Mijia M365, Gotrax GXL V2 and More (2)

My only real complaint (which may not entirely be the fault of the solid tires but rather the type of scooter you have) is that installation was hell, absolute hell. On the side of the solid tires, I had to boil them and then use the dish soap and water trick to absolutely FIGHT them onto the scooters rim. The real problem was on the scooters side though. Pay attention to how the tires are installed on your scooter because the front tire on mine was so interconnected with the handle shaft and the break lines that I couldn’t remove the tire, at all. It had to be done professionally or with professional tools that I didn’t have. I ended up settling for a front air tire and rear solid tire so make sure you can even get your stock tires off. The scooters I had came stock with air tires which became damaged and flat quite quickly. I got these to replace the air tires so I wouldn’t have to worry about that and they worked flawlessly! They’re very durable and I didn’t have any problems with wear or damage as I used them. They fit like a glove (once you actually get em on) onto the scooters I was using. The ride was a little bit rougher than air tires but it’s well worth it for less maintenance and having to worry about popped tires.

Good quality tire - took about an hour to put on my grandson's Jetson Knight scooter. I watched a couple of u-tube 'how to' videos. Place the new tire in boiling water for 20 minutes, etc. It takes two mechanically inclined people to do it.

Took a while to put on, but with the right tools it's easy enough. Just don't make the same mistake as me, where I finally got the tire on and then realized it was facing the wrong direction. Me being me, I wanted to do it right and ended up taking it off. That was much easier then I thought. The fact I never saw a video on how to take it off impressed me. So yeah, I put it back on for a second time and learned many lessons. I probably wouldn't mind taking it off and on, now that I know what it takes to remove it and put it back on. I used (26 in.) 3 Iron Tires that I bought from Harbor Freight, (3) screwdrivers that I found in my car, and used my spare car tire to keep the wheel hub centered. Also this was the motorhub that I was putting the solid on. So no zip ties would help. I think I might make a video about it later on and post pictures. Anyways the product came as described, although it had some scuffs around the inner tire. Happy I bought this, no more flats baby.

My son has had his electric scooter for about 3 years now and after many miles ridden, the wheels were worn down and he needed a replacement. These are a great replacement option. They are not expensive compared to others, they are hard plastic and fit into the scooter perfectly. It is a bit hard to get the old ones off and new ones in. I recommend purchasing a tire scoop set to help and also suggest letting the tires sit in boiling water for 10+ Minutes to get them more flexible. Plan on a bit of YouTube searching and sweat to get them on, it once they are on, you will be really happy with how the ride smoothly on the road and fit perfectly

Works perfectly for a gyroor hr9 scooter and never goes flat 👌

Worked good just like described but definitely a process to install.

So far so good I really like these solid tires much better than the pneumatic. Just a little bit of advice when putting these things on I microwaved each one three minutes and then Isprayed a little silicone on the rim put my knee on one end and push down with my hands on the other side of the tire real simple had them on in a couple minutes. might want to wear gloves they get a little hot

The tire smells really bad like a strong rubber odor. Took about 5-10minutes to replace the old tire with this nee one and it was not too hard. Taking the old one off was harder than getting the new one on. The photos for the item show that you should leave it in hot water to make it more supple and easier to fit onto the rim. I used the oven instead. The whole rear wheel with old tire and this new tire in the oven (170F for 5-10min) made it much easier to remove the old tire from the rim and also easy to put the new one on. The holes on the tire make it easier to install because you can put something like a screwdriver through it to wedge it into place. It should also make it easier to remove it when the time comes.

Desde que lo tengo me quite el problema por tener que parchar la llanta

Funcionaron bien, son mas resbalosas que las normales pero estas no se ponchan con facilidad, cuidado si vas mas rápido y caes a un bache, se sienten con ma impacto y fuerza.

Desde que cambié esta llanta no me tengo que preocupar de nada.

Después de varios pinchazos en mis llantas, esta fue sin duda una de las mejores compras que pude hacer. Aunque debo admitir que instalarlas fue todo un reto, encontré un truco que me funcionó: calentarlas en el microondas durante 5 minutos por lado (aunque no puedo recomendarlo al 100%, ya que depende de cada situación). Desde que las coloqué, no he tenido ningún problema y estoy muy satisfecho con su rendimiento. Si buscas una solución duradera, definitivamente valen la pena.

Muy buena relacion entte calidad y precio 👌