Feyachi 2 MOA Red Dot Sight for Rifle, Compact Red Dot Scope Reflex Sight

Optic packaging seems to be of less quality than how Feyachi package their off-set flashlight (Feyachi FL11), which is curious or they have that much confidence of the durability of this unit. You decide. Package contents include: Optic Unit P-rail Riser Block Separate rubber-band style dust cover. This optic does not have attached flip-up style covers. Cleaning cloth EXTRA Battery (for when you forget to turn this unit off after utilizing) Instructions Pamphlet (that you will probably not need for anything other than dialing this unit in at the range) Torx and Allen key for mounting and adjusting. end. Overall construction appears durable and solid. Mine had a small chip out of the black coating by the battery/case/on-off dial as seen in the photos but nothing that impacted overall functionality or aesthetic. Mounting process was intuitive and took a couple of minutes to mate the optic to the riser block and then to the P-rail. For this particular review, I paired the Feyachi RDS-22 optic with a Tacticon Falcon V1 Magnifier and they paired quite well with the magnifier unit having its riser shim installed. See photos for alignment. Figured budget with budget for an apples to apples comparison as someone out there might use that combo for their budget build. Red Dot settings are clear and bright considering the price/value realm that we are dealing with. Again, for a budget build, this optic would be tough to beat. As others have mentioned, there is a manufacturing item that creates a strange "bump"at the 5 0-clock position inside of the rear lens. It DOES NOT impair the line of sight or functionality of this unit. Simply some side-effect of the build process. I cannot say what it is or if it can be corrected next build cycle OR if it has any long-term impacts. In short, this red dot optic functions as intended for a great price point out of the box. Clear line-of-sight with an off-set flashlight. Partially questionable packaging. Some noted manufacturing items (2) that do not impact functionality and are just fine tuning for future build cycles. For a budget build or knock-around weapon you could buy multiple of this unit and get the same end-result as much, much more expensive optics. Note: To clarify two points before I end up answering a bunch of buyer questions...: The pic of the optic and yellow background with the red dot illuminated has a red slash through the lens created by the Camera Flash...not something to do with the Feyachi unit. Next, the pic of the mounted optic with the red dot and yellow background...the red dot is off-center due to the angle of the camera. The red dot is centered as with just about every red dot optic out there. It also easily clears the flashlight mounted canted to the right.

It's on my Crosman Custom Build 1377 air pistol and works perfectly out to 30 yards. The 2 moa dot is just right in that it does not completely cover small targets like mice. And at 15 yards it groups dimes on paper. It seems very sturdy and the build quality is good and it holds zero with only a click or 2 to occasionally to readjust for temperature changes.

Would rate this pretty good value for the price. Not the most uniform on the red dot itself but not bad at all. Got it dialed in very quickly and has held up to about 250 rounds of subsonic 22lr at 1050 fps 40 grains. No issues. My only real complaint is that the dial for different brightness levels is extremely tight. Like grandpa tightened the cap on the RC 2 liter tight.

I mounted a pair of these on my Ruger Mark III Target handguns. For the price they are a very functional, quality product. I’ve not had any issues zeroing the product, holding zero or failure to function in any way. I’ve used other more expensive red dot sights and find these to have more options and work just as well. Adjustments worked as needed to obtain the proper sight alignment and the battery compartment easily accessible.

Obviously, with the price point there was a certain stereotype that came with this red dot. It came in a plain black box but was neatly packaged in styrofoam. There was a small pamphlet with directions, a lens wipe, and two allen wrenches (one hex and one torx). Everything had a tight cutout in the styrofoam and came undamaged. The weight of the Red Dot was typical to the others in its class and felt more robust than anticipated. Considering the optic was only $50, we had little faith in its capability, but they sent it to us and by golly we were going to review it. As you can see in our video review we put it through a few rounds, zeroed the little guy and then commenced with playing with it. Attaching it was simple, but our first issue reared it’s ugly head and we thought it was the first failure of many. The hex screw stripped when tightened and it just made the entire process just a little annoying. However, it went on the weapon and functioned just fine. Zeroing was super easy, just take the covers off and get a flat head and turn in the desired direction. Took about 9 rounds to zero and we were in business. From our video you can see that we threw it around, dropped it on itself, and literally beat it and to our surprise, the optic not only continued to function, but it also held its zero!!! We were pleasantly surprised at this little guy’s performance. We put about 1,000 rounds through it and there were no issues. We will continue to review this little guy with more rounds and update this review as we progress. However, if you’re on the fence about getting this red dot, go ahead and get it. It’s affordable, but by no means is it cheap. This is and actual red dot and can hold a zero for a 5.56. It’s absolutely well worth the money and it won’t disappoint.

I’ll cut straight to the point, this is a Bushnell trophy TRS 25 red dot rifle scope clone. The real deal is only about $20 more currently. I have no experience with this particular Bushnell optic, and I was looking to save a bit so I rolled the dice and purchased this one instead. For the money, it’s definitely not bad. I have yet to test it out on the rifle, so I couldn’t tell you if it holds zero or not, however, it feels relatively sturdy once attached. It came in a decent little plastic box with foam inserts that can be reused for other small items, a lens, cleaning cloth, a rubber cover that feels like the straps will probably break off soon, and a small tool kit for installing and adjusting. My biggest gripe is the Torx head hardware and tools are absolute junk. The tool is very soft as is the hardware, and I will be replacing that as soon as I get to the hardware store. Overall, I’m not terribly disappointed, but for only a few dollars more you do get the namebrand and quite likely much better hardware with it. The true test will be on range day as well as long term durability, but at $40, the price was decent. If hardware was improved, I would rate this much higher as a better value for the price, but having to replace that hardware with a higher quality bolt is counterintuitive to the savings at this stage. The tool may as well be left out entirely as its complete garbage and nearly stripped on the first use, so don’t bother with it, just bit proper tools if you plan on modifying your firearms.

It comes packed nice in a plastic protective container. The red dot itself feels like its quality. Looks and feels nice. PROBLEM is the reticle is very blurry. Way too fuzzy to use for anything. And the price makes it not worth the trouble of packing it and going to ups for returning. Bummed I cant use it. I assume it took some kind of impact during shipping.

Good sight for the money. Mounted on 1970 Winchester Model 94, 30-30, Brightness dial a little tight when first used but has now become louser. Wish it has a on/off button instead of the dial for speed of turning on. The sight is small so the top ejector works without the casing hitting the sight. Went to range to sight in without problems. Very fast target acquisition using both eyes open. Mounted in a few minutes with no rocket science required. Can not speak for battery life, since i am in the habit of putting new batteries in my equipment every time I go into the field.

I bought this for my GSG16 as i've only been using the iron sights since I bought it. Easy to install on the rail. I've never zero'ed a red dot before but it wasn't that hard to figure out. Brought it with a flat head screw driver to the range and adjusted it till I was happy. Took the gun to the range a couple of days later and fired off 250 rounds that afternoon and didn't have any troubles. The GSG-16 is a .22LR so the recoil is minimal but this little unit held up really well. I was so Impressed I bought another one for my Ruger PC9. We shall see how it performs on a 9mm carbine but for the .22LR I am VERY impressed for the money i spent on this so far.

Looks like, acts like, sights like the Bushnell. Nice little optic, well suited to my Ruger 10/22, with easy set up and accurate for my level of shooting. I find the dot just slightly larger than I'd like, but my vision is challenged a bit, and this allows me easy adequate target acquisition.

This optic holds zero well, tested on a .223 and .22, and 30-30. The dot is precise for longer range shots, being 2 moa. Its fully fog proof, tested leaving it in my truck in the cold and bringing it inside and vice versa. This isnt just good for the money, its a great optic. Its brighter than a Trs-25, and has nice features like slots on the windage and elevation caps to adjust, instead of looking for a coin to do the job. Also any reviews that mention a starburst, this is a common side effect of an eye astigmatism and has nothing to do with the dot (just have them take a picture of the dot and you can see its usually the case) Anyways very impressed, this is the 2nd one I get. Will update with a video

very nice and clear true 2MOA dot. Well made. Very compact. So it maybe ok for some .22 toy like GSG but looks small on bigger guns. If made in 35-40mm would be nice.

I've purchased 2 of these sights to go on my hunting rifles, one worked perfectly and the other was very dim even with new batteries. I contacted Feyachi by email and told them the situation, they immediately sent me a replacement by expedited mail free of charge. These are obviously not the highest quality sights you can buy, but they work very well and are the best bang for your buck on amazon. I'll be buying more of their products going forwards, just can't go wrong. Furthermore, their customer service is outstanding, they really stand behind their products. ***Update*** I've got one of these sights mounted on a .357 Mag Carbine and have put around 300 rounds through it after it was sighted in. It still holds zero perfectly and works beautifully.