2 oz Eclectic Products 800432 E6000 Craft Adhesive

Really like this glue. It works on most anything and dries clear. It's strong and durable and less messy than super glue, making it very easy to use. This is my go to glue for most of my home projects.

I have been using this glue for many years with excellent results. It is extremely strong and sticks to almost anything. I’ve repaired the soles of my desert boots (see pics) which prematurely separated but otherwise had many years of life left. They have held up for years and still holding. I use this glue at work in a fabrication shop where we make devices using all kinds and materials. I reattached the Velcro pad on several orbital sanders, damaged electrical cords, cracked plastic housings, etc. You need to be careful not to get it on your clothes as it with seep into the fabric and be nearly impossible to remove. Once it sets up it’s very hard to remove so plan ahead, tape off or cover parts you need to protect. Clean the intended repair points if dirty or if oily use alcohol or other cleaner that won’t leave residue. It dries clear and will remain clear and flexible for a long time but may begin to yellow slightly over time but not like epoxy which gets very dark yellow and brittle over time especially when exposed to sunlight. Some plastics will require that you rough up the surface to give adhesion. Keep the cap and tip clean and well sealed or it will dry up in the tube. Use ventilation as it has a strong odor while drying. Fabulous glue when used properly!

My Garmin Forerunner 205 GPS Receiver and Sports Watch literally blew apart during a bicycle training ride recently. It was attached to my handlebar when the entire face blew off into the highway, leaving the "base", along with the strap, still attached to the handlebar. After watching the "facial plate" bounce down the roadway behind me, I turned around, picked it up before it was run over by a car, and stuffed it into my shirt's back pocket. When I returned home, the facial plate looked pretty rough. But I has able to press it back into place on the base plate, and holding it very firmly, it did initialize when I pressed the power button. Being out of warranty (of course), Garmin would "repair" for a flat $69.00, plus S&H. Enter E-6000 Adhesive. For $7.49 with free Amazon Prime shipping, I figured I would give it a shot, since it was a gel compound, and I figured that I could put a serious long term grip on the unit with heavy duty rubber bands while the adhesive dried. When the E-6000 arrived, I carefully read all the instructions paying particular attention to the warnings about adequate ventilation. Curing time was 24-72 hours. Outside with a very steady breeze, I used a toothpick to apply the glue to both parts of the bisected Garmin 205 per the directions. Waited 2-7 (closer to 7) minutes, pressed the two pieces together, then wrapped around upper and lower part of the 205 with rubber bands as snugly as I could get them, but not so tight that it squeezed all of the glue out. Nice little project, and even though I thought I had done a fine job, I gave it about a 1 in 20 chance of success. After all this was pretty sophisticated electronics I was dealing with here. All appropriate contact points had to be seated properly and hold together firmly AFTER the rubber bands were removed. And the the facial plate had taken a long series of bounces down the highway at a speed of around 20 mph. After 48 hours with the rubber bands still in place, I hit the power button and the unit initialized. After another 24 hours I removed the rubber bands, hit the power button, and Eureka, the unit initialized again! I removed the excess glue, being especially careful not to pull any cured glue from within the seams of the unit, as the dried glue is very rubbery. Now the real test. Strapped that sucker back on my bike, and hit the road for a workout. Amazingly, the Garmin 205 worked flawlessly. What more can I say? The proof is in the pudding. Not sure how long it will hold up, but I am impressed with E-6000 adhesive, and will not hesitate to use it again on future projects.

I’ve used this adhesive on several repair projects with very good results.

On the one hand, this stuff is extremely impressive. It's been *hugely* useful in a whole *bunch* of ways I couldn't have anticipated (e.g. repairing flash drives, costume jewelry, and even a broken sensor off my home security system) when I first bought it for the one specific and narrow purpose of repairing a rare and collectible vinyl figurine that had broken in transit, and I couldn't be happier with the hold and results. On the other hand, actually *using* it is - to put it bluntly - a colossal pain-in-the-butt. It's virtually impossible to be even remotely precise in any way about the amount you actually get out of the tube, and it will largely just keep flowing for at least 5-10 seconds no matter how gently you try to squeeze. If the surface you're applying it to is smaller than a US/Canadian quarter dollar coin or any shape other than perfectly flat, the only reasonable way to actually use it is by squirting however much *decides* to come out of the tube onto a paper towel or some other form of disposable dropcloth, and then carefully applying only what you actually want/need to the relevant object/surface with something like a toothpick or needle - discarding the rest. Don't get me wrong, it gets *PHENOMENAL* results once you figure out how best to actually use it for yourself, but the annoying application process is sufficient to dock it a star.

Unbelievable price. I have used E6000 for around 20 years and have paid triple the price at local retailers. This is the MOST AMAZING Jewelers Glue I've ever used. It is clear and tough. I have used it on metal, wood, cloth (for Austrian crystals). I am a dress designer and I could not live without this product. I use hundreds of dollars worth of Swarovski crystals on my dresses and costumes and I need them to stay put. Especially for stage costumes that have to be worn, bumped, folded and thrown around back stage. If the rhinestones fell off easily, I would lose business. This glue holds better than anything I have ever used. I've also used it in my home to fix lamps, glass, magnets and a host of other uses. I have had things break again, but never at the original point where I used the E6000. It soft sets in about an hour which gives you plenty of time to make adjustments on odd breaks, but fast enough to work on fabric and still allow you to do a whole dress in an 8 hour sitting. It's completely dry in 24 hours. This has been amazing for me when I'm on a deadline, gemming the night before a performance, and still having them stay in place and look beautiful. I've made pageant crowns, and costume crowns for movie sets. NO, not with solder, but with E6000. They last for years. One of the actors dropped his VERY ornate crown into traffic. It rolled all the way across the street on asphalt and didn't lose a single stone. Please use in a well ventilated area as the fumes can be strong, although not as bad as something like airplane glue. I never actually open the tube lid. I learned years ago to make a pinhole on the side near the top so that a small amount comes out at a time. When done, you just leave it and it crusts over, then when you come back next time, you can just pop off the bubble use the pin to start the flow again. I'm often working with very tiny stones. Oh, and yes, I've used this on REAL GEMS as well, topaz, amethyst and quartz. I trust it that much.

There is NOTHING BAD to say about E6000. I make and sell crafts that are used outside. And this is all I use. And it works very, very well. But it also works well for inside items. The only thing I have found that it doesn't work well on is fabric because it goes through it. But even leather, plastic fabric, suede, and felt you can use it on.

The ”ECLECTIC PRODUCTS 800432 - 2 oz E6000 Craft Adhesive” arrived promptly and was just as described online. This amazingly strong adhesive has several important features. PROS: * E 6000 is a staple in my home. I always re-order a new tube when I see that the old tube is running out. * I generally use this excellent adhesive in making repairs in and around my home. * Ever had a pair of shoes that you don’t want to get rid of?….even when the sole falls off? E6000 came to the rescue of this old but loved sandal over a year ago. The sole has been attached better than ever and has given this sandal a whole new life. They are still my E.B. favorites!!…next… * It’s great for reattaching broken straps on my favorite E. B. sandals that have come loose from the base sole. Using clamps with the adhesive for a few days, the repaired sandal straps never come loose again. * This excellent product is a clear gel that is easy to apply. It can be used on vinyl, wood, fiberglass, glass, ceramic, leather concrete, plastic, metal, rubber and even fabric. * This hard-to-live-without adhesive is one of the best items that I have in my household for making repairs. Like my Hubby, I can’t imagine life without it! CONS: * Use outdoors to avoid breathing vapors. Open windows if used indoors. Enjoy! Highly Recommended.

Holds craft diamantés on longer than other glues, a little bit stinky so use in well ventilated area. Good value for money.

The glue is dried out in the tube , unusable

とても強力で、革の作品作りにぴったりです。不満はありません。 ひとつだけ注意点があります。新品の状態では中身がたくさん入っているので、押すのをやめた後もしばらく接着剤が出続けることがあります。 少し使うまでは、容器を強く折り曲げたり潰したりしない方がいいです。中身が多いので、思った以上に出てしまう可能性があります。 それ以外は、とても満足しています。

Muy bueno

وجيد