Vinyl Record Arm Brush - Anti-Static

Just received today and had it on my turntable in a matter of minutes. Extremely easy set up and the product is well built. I did purchase the other brush arm that had two for the same price. I was very disappointed in that was of poor quality and didn’t work well at all, returned it and just bought this one. There is a major difference between this one and the other. I only played two records so far and the tracking was perfect and coincided with the tone arm. It definitely cleans Your records, helps with the pops and keeps your needle clean. Very happy with this and highly recommend it! UPDATE Its been a few days and I have played about 10 albums and it continues to work extremely well. The tracking of the arm is perfect and without a doubt the record and the stylus stay clean. This is a very good item and does the job! Only have good things to say about it.

The way this comes packaged, it seems pretty clear everything is in there you'll need, except an instruction sheet. I get it though, it's so idiot-simple the printed instructions on the back of the box will work, if not, there's a link to a video. I honsestly thought this had been a product return that was re-sent. I couldn't find the connecting wire. And the lower-mass weight on the front end of the arm seemed out of place somehow. I almost returned it as missing parts until I looked down at my shoes under my desk and there was the wire. Rolled and wrapped up with a rubber-band, I didn't even see it fall out of the package, or notice it inside from the outside. It was late, I'd worked two back-to-back shifts 14 hours each and with sleep apnea, well, I wasn't really thinking clearly. Next morning, bright-eyed and fully caffeinated, I took a second look at what I had, READ the instructions - again - and had this up and running in about two minutes. Hardest part was getting two spade terminals onto the ground wire point on my preamp at the same time. Balancing? EZPZ. Sliding the weight a bit forward to BARELY get the goat or whatever sacrificial animal's hairs to ALMOST dig into the grooves to the arm would track and whaddya know... an album I had played just a few short days earlier was QUIET in the quiet sections, NO static pops OR cockatoo dander snap crackle and popping at random. While most of the dander/dust problem I've worked my way around, whatever little bit was left was GONE. Even more, a colored vinyl disc on a deerskin mat seems to be the WORST combination for static cling, but there wasn't any. So pros: Easy to set up. Works as advertised. Kind of gimmicky but this kind of static brush has been used on records (vinyl, bakelite, shellac) going on a hundred years and it does work, just got to get it set up right. Cons: Not entirely idiot proof. Install when fully rested for best effects.

This record cleaning brush has a carbon fibre bristle core (and grounding wire, that you usually connect to your amplifier) that helps drain static electricity from vinyl records, as they spin. It neutralizes much–– but NOT ALL––of the static cling that attracts dust and creates clicks & pops as a record is being played. After playing, the disc needs to be removed, flipped, or changed; which means the anti-static arm has to be swung out of the way, of course. However—unless you spend the time to REMOVE the anti-static arm from its stand, and tuck it safely away—your brush tip will probably end up resting somewhere on a dirty part of the turntable, while you’re changing your records! A more useful & practical addition would be to include an integrated, adjustable ARMREST for the brush, so it doesn’t touch anything when not actively being used. When the brush’s arm is swung off the record and placed on the armrest, it would serve to keep the brush tip suspended ABOVE the turntable surface and prevent the brush from getting dirty, or unnecessarily worn. Lack of a brush lift is not a major deficiency; but, having this feature would add a lot to this already very nice product.

Love this thing, it doesn't completely eliminate those clicks but it does reduce it by a huge figure. Also helps keep the stylus on my cartridge clean longer. It's installs very quickly. Only gripe I have is that I wish they made a rest for the brush when it's not in use.

慣れるまで頑張れ

Tolle Teil, funktioniert, wie gedacht und erwqartet. Tatsächlich brummt mein Subwoofer/Reciver nicht mehr.

Easy to install, looks great with the turntable and Hi-Fi gear and works well. Additionally it enables me to enjoy my vinyl LP collection whilst protecting the stylus from dust. Thanks Amazon.

A good product, very easy to install, saves the needle from dust and also reduces some static. Looks great with the turntable. It really makes some difference, must be given a try.

This easy to setup and use record cleaner and de-statisizer works as it was designed. Contrary to many beliefs the clicks and pops heard on vinyl LP's is usually not dirt or grunge, at least not on well cared for and properly cleaned LP's. But it's often static charge build up on your vinyl LP's. Though ground in dirt on often or notably used LP's may not be cleanable, and groove damage, scuffs or scratches will be heard as clicks, pops and distortions, if one can keep ahead of dust that falls on your vinyl LP's as you listen to them and can reduce static charges, then you will often your vinyl LP listening to be more enjoyable. This Hudson record cleaning wand set up is to be used in conjunction with good record cleaning set up. I personally use a Spin Clean Record Washer to clean all my vinyl LP's firstly. This does a great job of deep cleaning records. But one thing I find Spin Clean may add, is static build up as you wipe dry the vinyl LP's after washing them. This may cause one to think it does not clean well enough, but it does. You just have to get at the static charges next. When playing your vinyl LP's you should run at first a carbon fibre brush before play, making sure to ground out the brush over the spindle or other metal surface that is grounded on the turntable as you destatisize the brush. Run it a few times over your LP's before lowering the tonearm for play. Another choice is a record brush used with cleaning fluid to dampen it such as the Discwasher cleaning brush and D4 fluid (the older ones used from the 70's and 80's are best). The Audio Technica AT-6012 record brush and fluid are a good choice for new alternatives as well as there are other brands which may work well enough too. But it's important to run a cleaning brush over the LP before listening to it so as to help rid of some surface dust and to help reduce built up static, especially in the dryer winter months. But here is where this Hudson record cleaning wand can help improve things more. It runs over the vinyl LP grooves as you play the album. It sweeps away falling dust and helps reduce static charges that cause clicks and pops. I found that once you balance the wand with the twist-able back counter weight, to then turn it just a couple turns forward and then slide the little slip weight to the front of the wand. This I found just has the brush fibres sit a bit harder on the record surface. Be careful if you have a belt drive turntable with fixed speeds though as this can cause a bit more drag slowing even if slightly the turntable speed down. If your turntable has variable pitch control you can adjust for this. If your turntable is quartz locked controlled, the computer will likely adjust the speed accordingly. This all said, I found the Hudson cleaning wand set up to do EXACTLY what it is to do, sweep falling dust away and help reduce static. No, it may not stop all clicks and pops, for again those could also be from ground in dirt and grunge or from groove damage, scuffs and scratches. But if your vinyl is generally clean and quiet, this addition may keep it that way for you. Well worth the money to try if you p,an on being a vinyl LP listener and collector.