Right Angle Banana Plugs

Great plugs, good quality and easy to use. Great for cables that are on the thicker side as the sleeves are flexible so it doesn't matter if the grub screed can't be tighten so they sit flush with the shaft. I replaced all of the plugs to the back of my AV amp, great 90 degree design meaning I could push my amp back into the tight resses. I hadn't changed my plus for years, so I trimmed the wire before installing these and noticed an immediate increase in DB, after installing I had to readjust the gain, they were that much of an improvement. The connection into the amp was solid and reassuring tight when pushing the plugs in. Great value for money, highly recommend for a quick refresh to tired old plugs and oxidised cable ends, for best result suggest training your cables.

I was very impressed with these. Their quality seems great. The double screws were nicely machined and resulted in very secure fitting of the speaker wires. The plugs themselves seem to have a decent tolerance range in terms of the diameter of hole they will fit. There was a slight difference in that regard between the fittings on my amp and my speakers, yet these banana plugs fitted comfortably in both. A different brand was too large for my amp. The 90 degree fitting suited my purposes well, too.

Well worth the money. Good fit on the cable though you will need nimble fingers. Good fit in the socket and good sound reproduction. Recommended.

Great quality and nice design. Works well for intended use and makes speaker termination look neat. Easy to use and seem durable. Nice connection quality and great value for money.

Great Product. Great for back of the speakers so that wires go down to the floor rather than straight out. Very good quality.

Excellent and almost perfect Gold good quality and easy to fit cable wire ends in - with two grub screws ensuring secure fit Slot in nicely and securely with no play No issues with sound quality - don’t bother spending more for “audiophile” overpriced stuff as these look good feel good and work great The right angle nature is a god send My only issue is that the Black/red sleeves can be a pain if fitting to cables with thicker cable outers 5/5 high quality bargain

Very good plugs, easy to use, very secure to get the leads firmly in and goes into the speakers firmly, so really is a good, solid connection.

Fitting your own banana or spade plugs is never going to be as good as having them professionally fitted by a hi-fi cable store. However, I purchased these to give me a better option than using bare wire at the back of an AV receiver, where there is insufficient space for high quality professionally fitted ones. Contrary to some reviews on here, I had absolutely no problem with tightening the retaining screws. They are the same size screws as you would find in he connectors of a 13 Amp plus, so you need an electrician's screwdriver to provide a tight fit - tiny spectacles \ jewellery screwdrivers will be too small and create problems. I understand some comments that it would be better if both screws were on the same side, to increase the wire contact area, but that side would then become more "hole" than metal. All the heads on mine were solid (good welds). Bottom line, the sound quality through them is good.

Good and satisfied, but price feel a bit expensive

Often the backs of your speaker or amp are close to the wall and the right angle banana plug avoids taking up more space than necessary behind the speaker or amp. These seem to be made of gold plated brass with two brass set screws in each plug to firmly hold the wire end. They come with insulating sleeves that push up over the part that gets the wire to avoid the possibility of shorting out the signals. The insulating sleeves like the picture shows come red and black to indicate the polarity. The insulating sleeve appear to be a somewhat stretchy PVC sleeve. If you use large wire, especially if you tin the ends with solder, the set screw heads stick up a bit and it’s not that easy to slide the insulating sleeves up. On the other hand they are not liable to slip off. If you cannot get the sleeves over the screw heads you might need to use appropriately colored tape or shrink tubing. I used 14 gage speaker wire that I tinned the ends with solder and with some difficulty I was able to slide the insulating sleeves up onto the end. These bananas are made to fit pretty tightly into the typical binding post end. That ensures a good connection but you do have to push with some force to insert them. Mercifully the set screws are already screwed into the fitting, you just have to unscrew them enough to insert your wire. I bought some straight bananas that came with all the set screws in a little bag. What a pain that was with several speaker connections and fat fingers. But these do not have that issue. The quality seems excellent for these right angle bananas and they are made to accommodate larger wires And make a very good connection to the typical binding post center hole.

Ottimo prodotto, non è la prima volta che lo acquisto.

Ces fiches banane sont de très bonne qualité, je les ai montées sur du "Real Câble" de section de 3mm pour Haut-Parleurs Très Haute-Fidélité. J'ai sélectionné ces fiches coudées à 90° gainées de plastique moulant pour la connectique de mes Enceintes Triangle afin qu'elles ne risquent pas de générer un court-circuit si toutefois elles venaient à se toucher au dos des enceintes. De plus leur angle de 90° permet au câble en cuivre particulièrement lourd de les libérer des forces supplémentaires qui pourraient occasionner une cassure de la fiche si celle-ci était droite et non pas coudée. (Voir Photo) N'hésitez pas avant de les monter sur les câbles à insérer préalablement chaque fiche une première fois dans un bornier type qui va accueillir la fiche ultérieurement une fois reliée au câble pour la préformer (roder) afin de faciliter son insertion ultérieure, car les fiches neuves sont assez difficiles à insérer la première fois et il y a un risque de les abimer si l'on force trop ou surtout de travers, ensuite la 2ème fois et les suivantes ça va tout seul. Vous comprendrez-mieux lorsque vous aurez procédé. Attention également de bien les aligner lorsque vous les vissez sur le câble afin qu'elles soient parfaitement positionnées en face des borniers et éviter de tortionner le câble si vous les avez vissées comme des fiches droites sans vous soucier de leur orientation. J'espère que ce commentaire vous sera bien utile et vous évitera des erreurs inutiles !

Very good product. Solid connector, not like the fragile pieces you can buy at a normal retail store. These work well for higher end audio.