4432

Great solid sewing machine that can handle abuse. My teenage daughter learned to sew on my machine so I bought another in black for her for Christmas. It’s a simple straightforward machine than can handle thick her fabrics like denim easily. My daughter is always alternating her clothes, especially jeans and this works great. Enough additional stitch options to be creative without being too much. Easy to use. I have been sewing for over 45 years, and have used all types of machines….i really like the simplicity of use and the fact that it is easy to maintain. Singer is always a good bet as they have a long history of making durable, quality machines.

I have been sewing for about 50 years. I have used many machines. My latest love was a Pfaff1222E. It needs repair (it's 40 years old) I had two other, more basic machines, and both of them died during my latest project, which was a ball gown. After panicking, and research, I bought this Singer Heavy Duty (Black special edition) 4432. I wanted a machine with a lot of utility stitches, not so many " ducks and bunnies", at a great price. I was able to complete this dress, which meant sewing on double faced satin, crenoline, very sheer fabrics, and some techniques I hadn't used before, such as applying spiral boning, with this machine straight out of the box. All layers sewed very well with no machine drag. I was able to determine the different stitches very easily, and adjustments went smoothly. I had only 2 problems. I couldn't wind a bobbin, while leaving the machine threaded because it seemed to somehow cause problems, and the needle threader was a bit awkward, maybe that just takes practice. I find it inconvenient to refer to my phone, and would greatly appreciate a "hard copy" instruction booklet instead. I have sewn on a wide variety of fabrics and leather (4oz) in the past, and the heavy duty aspect of this machine seems to be strong enough to stand the course, yet it seems crenoline and chiffon very well. There are quite a few utility stitches, that should meet the needs of special finishing of delicate fabrics and those that tend to ravel easily. The feet were easy to change out. Adjusting the stitch length and width, the tension, and the pressure of the presser foot were also important in my choice, these seemed to work well for my project. I would highly recommend this machine for those serious about sewing. It is easy to learn to use, and durable for heavy fabrics or lots of layers., and gentle on sheer fabrics. The price is exceptional. If all goes well, I will buy this model again for my granddaughter.

Easy setup. Machine is very quiet. Its equivalent to my 1990 HD cast iron White sewing machine. The machine came with no instructions, but there are lots of tutorials. It was missing 1 bobbin but I needed more then 3. Over all I'm very satified with the machine. I've had no jamming or thread breaks its stability excedes for the priced I paid. I highly recommend this machine, but watch some tutorial before jumping in, so you wont be frustrated. Its a wonderful machine.

I had a Singer CG-590 Heavy Duty machine from the mid 1990's so I know what they can do. Sadly, I had to retire mine previous one as the tension unit couldn't be fixed. The new machine sews smoothly but there are a few things that are not as user-friendly. The Off/On switch is so low that when it's lowered into my table for quilting, it's hard to reach. The former bobbin compartment was easy to flip open but now it's not accessible in the drop-down position. It doesn't come with a darning plate to cover the feed dogs. The switch to lower the feed dogs are not accessible on the back of the machine below the level of my table. I would have to pull the machine out to use it. Had to order a darning plate to cover the feed dogs and search online for a manual as Singer (and other companies) don't provide one. Oh well, it is a solid strong machine and I like the black color.

This by far is one of the best sewing machines singer has ever made heavy duty great for starting out can do buttonholes and many stitches, it'll last a long long time my first one lasted over 25 years.great price and very durability

Finally, a sewing machine that works like the old Singers. No fancy electronics, and the bobbin actually loads. I love it.

Where do I start?! I wanted to love this machine, as i have an old singer from the 70s that i love, it was passed down to me from my grandmother, and could straight stitch through anything! Ive also had 2 Brother machines, both consumer models, both able to run bartacks through 3/4 webbing like a hot knife through butter. This Singer HD however, is the worst machine i have ever owned. It looks good and boasts a number of great stitch options, but thats where the positives end. The build quality is abysmal. When i received it, it was not ready to sew. Almost everything on the machine was loose or falling off. After going through the machine, ensuring everything was tight, attached, and ready to rock, i started sewing a few test stitches, only to have the bobbin feed dislocate itself inside the machine. After fixing this, i began again, and within 3 minutes, had bent the needle at low speed, through a cotton pillow case, on a standard zig-zag stitch. Figuring perhaps it was a fluke, i began again with a new needle. Within 10 seconds, the second needle impacted the presser foot plate and broke. Inspecting the machine, i tried to determine why it was having alignment issues right out of the box. Everything seems perfectly aligned at low speed when rotating by hand. Starting again, with a new needle, at slow speed, on a straight stitch, 5 stitches in, it broke another needle. So it becomes obvious that the machines alignment from the factory is off, or there is a major fault with the presser foot feed. Starting once more, on low speed, with a zig zag stitch, the machine breaks the needle, binds the bobbin, and dislocates the bobbin feed. I have sewn over 4000m of fabric with my old Brother, and not once had a feed issue or broken a needle. I am beyond fed up with the singer "heavy duty" and would label it a paperweight. To further expound on issues with the singer, it has the worst speed control i have experienced on a sewing machine. Sometimes it is smooth linear power/speed increase throughout the pedal travel, and sometimes, you get to 3/4 pedal travel before the machine even starts to sew. Other times, a mere 1/16 of pedal travel will ramp up stitch speed to 1000. I wish i had purchased anything else. The Singer "heavy duty" is anything but heavy duty. If i could return it i would. It is an absolute garbage machine, and should be considered light duty at best. Look elsewhere for a good heavy duty sewing machine and save yourself hours of turse words thrown at this machine.

This machine is very easy to use. I am a beginner and I am able to use with ease. The machine fits perfectly on a sewing table or even a desk. The machine feels very durable and the pads on the bottom make it very stable and doesn’t move during use unless you physically pick it up to move. It is about 15 lbs so if you like me are chronically ill and have a weight limit of what you can pick up this might be at the top of your limit. It came with many pieces that I do not quite know how to use yet but I’m looking forward to getting to know my machine. This machine feels very well made and I expect it to be operable for many years to come.

Wow et wow et wow !!! Singer, it's the best .

Is snel bezorgd

Download the manual when you order it. It doesn't come with the product. My old heavy duty one was being serviced and taking longer than expected. I had stuff to finish so was eagerly awaiting delivery of the upgraded one. I downloaded the manual the day it arrived and stressed myself out regarding the printer instead of zooming off and completing my project. That said I love this machine. But it doesn't like cheap needles so get Singer ones. Worth every penny.

Works well So far so good.

زوق في التعامل