Yaheetech Adjustable Drafting Table Art Desk,Storage Drawers & Stool,Black

Assembled easy. Got a like new one and everything was there for $80 shipped. Had one blemish on right rear corner where the black peeled or chipped about an inch but didn’t make any difference for my setup which is currently a 26.5x26.5” galvanized a/c plenum as a spray booth. As can be seen there is plenty of room on the table for it and a full rack of paint plus brushes and etc on the left and plenty on the right. The drawers are useful and actually hold a full drawer of paint bottle weight so that was surprising that they still slid fine. The plastic tray is there and kinda useful but more for erasers and pencils I think yet gets used. The plenum is a foot deep leaving room for a six inch inline fan and ducting pretty exactly with the front lip right over the pencil ledge. The stool is a nice add if you don’t have one but I use it for a little side stand. The table raises and lowers really easy and locks into several positions well. This thing fit my current needs exactly. It will accommodate a 2x2x2’ plenum also but that requires a side pull vent if you want to push the table to the wall. It is sturdy and stable. The only thing that was a bit goofy on the install was the bottom shelf and just took a bit of manipulating but easy enough and the rest was straight forward. And don’t set the legs all the way down in there to start with when you get there in the instructions. Keep them up high and then lower to where you want it with the knobs. I did that initially and getting the table back up required me standing on frame and doing that one side at a time as I raised it a bit at a time till I got it to the top and then set it at the height I needed. As to what was available on amazon, this unit for the cost is exceeding my expectations needs wants and desires so far and I would recommend it. If you need something fancy then this probably isn’t it although highly functional, it is after all inexpensive and basic with mesh drawers and random plastic and inexpensive overlay on the table top. The lower shelf thing is functional but quite limited and could be a bit wider maybe but it holds what I need it to so yeah. Good strong frame on it and the knobs hold well and tight the feet are nice and wide and the whole thing sits flat even and not wonky as long as you have it set with a level or the knobs in their corresponding holes which are level actually I checked. Great option especially at like new.

First, I feel like I should review this product because I was a little apprehensive when ordering. There were many good reviews, but also quite a few that didn't like the quality or had shipping issues. So, I was relieved when mine arrived with only minimal damage to the packaging. Since the desk was protected by additional layers inside the box, there was no damage to any parts. Assembly was easy. It took about 1.5 hours and I did it myself other than my husband helping me assemble to the desktop onto the base and adjust the height. The parts, tools (other than a Phillips screwdriver) were included, and the instructions are easy to follow. The instruction book was put together a little strange where I had to flip back and forth for the next page to be facing the right direction. Maybe this was just my booklet, but it wasn't a big deal. Once everything was put together, I was so happy that there was no damage to any of the desk components. There were a few places where I could see where the metal was welded together, but very minor and it doesn't affect the functionability, so it's not an issue. This will be a multi-purpose desk for me, however I know I will use it a lot for diamond painting. Being able to angle the desktop will be great for this purpose. I added an attached led magnifying light (not included) to lessen the need for a light board or glasses. The drawers are pretty sturdy for fabric and the inserts are sturdy enough for their purpose. I was able to adjust the desk for my legs to go under without hitting and the top height is still ergonomically while sitting on the stool. I like that this desk can even be adjusted for standing. The stool is sturdy and comfortable, although I haven't sat on it for long periods yet. The only thing I wish were different is that the sliding surface would slide all the way under the top to save space when not in use. Not a deal breaker though. All in all, this desk seems like a good value.

The table itself is very sturdy and works as it should. Assembly was doable without a second person, but definitely took more time and would have been easier with help. The stool however came warped or something because it is very wobbly. I took it apart and reassembled it several times ensuring I followed the directions properly, but it still wobbles. Overall happy with the table and will probably just get a different chair for it.

A solid well built desk. Very versatile making it great for drawing and painting. Good instructions for assembly. Took about 45 minutes to assemble. Wife loves it! That's most important thing.

Thought it would be kind of cheap but actually really decent and sturdy! Love how it tilts or lays flat for drawing, diamond painting etc! And the drawers are handy too

Easy to put together. Sturdy. Love it! Fits everything.

This drafting table is well designed and easy to assemble. It has adjustable height and table angle. I don't know why the designers chose to put the shelf on the left, given that most people are right-handed. As a right-handed person, it is most convenient for me to have a shelf on the right, or actually, both sides. I'd like to suggest to the designers that they put shelf brackets on both sides, so the customer can choose. The included stool is perfect. I thought the drawers and organizer would be in the way, so I did not install them. I bolted aluminum ange to the right side of the frame, so I can have a shelf on both sides of the table. Instead of installing the feet, I placed the table on a rolling platform/dolly, which makes it easy to move the table for cleaning, etc.

This artist's table fits the bill for me. I find it to be sturdy and the features well thought out. I would not describe this as a drafting table necessarily, as drafting tables offer more surface area typically, but I find the area on this table to be sufficient for illustration and other drawing projects. The work surface tilts, and the entire top portion of the table is height adjustable with storage for art supplies. In addition, the feet can be adjusted to keep the table surface level. The frame is surprisingly solid when considering the price point. If I had one complaint it would be the 2 drawers located just under the work surface. The table has slides for the drawers to seat in, that allow you to pull the drawers in and out. Unfortunately, this is very tight, and the drawers' do not move in and out easily. Adding to this issue is the drawers themselves, as they are made of a type of canvas-like cloth. Despite its shortcomings, this artists table is a great buy. You get quite a lot of features for the price. I find it to be sturdy, with a sufficient enough work area to complete art projects. In addition, the table includes a small, cushioned stool as well. It took me a little over an hour to assemble. I found the instructions to be clear and understandable, and despite the recommendation that this is a 2-man project, I completed the assembly alone. I recommend it.

Salió defectuoso .. el proveedor aún no me reembolsa el pago . Nunca me llegó la etiqueta de devolución. Sigo en espera… desafortunada compra . NADIE SE HACE RESPONSABLE!!!si no pongo una estrella no me deja continuar.

Good value for the price. Materials seemed to be rugged / good quality. Was securely packed and instructions were easy to follow. The adjustment on the desk surface to raise and lower it worked well. I would order from them again.

Not strong or stable. Raising and lowering the table is very primitive and difficult and requires a water balance. The table is not worth half its price.

We love this art table! Practical and pleasing to the eyes!

For the price, this is a good little desk. It is cheaply made but very inexpensive so it's important to match your expectations. Goes together easily with most holes aligned very well. Due to the soft metal, it required persuasion to bend things into position a few times. Most of the assembly i did by myself but needed a second set of hands to align the top when attaching it to the legs. The side shelf that slides in and out immediately got damaged as the veneer stripped off the edge when sliding it into its track. I intend to paint on this desk so I'm not concerned. The stool is very low but I think it will work. Easy to adjust the tilt and seems pretty sturdy. Takes two people to adjust the height.