ABS Sheet - .060" Thick, Black, 12" x 24" Nominal

This plastic was perfect for my application. It is very easy to work with, I had no trouble forming it to my specifications with a cheapo $10 rotary tool from Chicago Electric. The texture is very grippy and gives the material a great overall feel. I was impressed with the strength of the plastic as well. For the weight, I don't think I could find anything stronger at this price point. Overall, couldn't be happier with the product and service. PROS Cheap--cheap enough that I can easily replace it when I make mistakes Durable Textured Easy to work with Arrived quickly and in good condition CONS Texture makes it a little difficult to work detail on the prime side

There is not much to say about this product. The product arrived just as described, it is a full 1 square foot of ABS plastic. It is textured on one side and smooth on the other. The smooth side was nicked in two places, but I am using it on the underside of my GoldWing bike as an addition support to a piece that is cracking so that did not matter much to me. Curious on the thickness, I measured with my caliper and I was hitting right around the mark of .242". Overall this is a good product. It arrived as described and worked exactly how I wanted it to. I wouldn't have an issue in buying this again.

If you're using it for an amp on legs it will bow in the middle, you would be better off with thicker abs. if you're mounting it, it will work perfect make sure you have the correct rivnuts that bite into it, the kind that screw in with an allen key. The glossy side scuffs and scratches extremely easy so was not usable for my application. All in all it worked fine for an amp rack but I never thought that plastic should cost as much as it does.

I am a total novice to making Kydex sheaths for anything, but I am enough of a tinker and budding custom knife maker, that I hoped I could figure it out, After watching a bunch of tutorials on Youtube about Sheath making with kydex, I decided to pull the trigger and make a go of it. As I have no experience with this before, I can't rate this kydex with regards to comparison with others. However I can attest that my FIRST project with this product went well enough that I have already made plans for several more sheathes and designs for other knives. My first attempt was to make a proper sheath for my Becker BK9. I wanted a scout carry configuration to keep it out of the way (horizontal instead of hanging up and down), and I wanted to be able to attach other things to it with ranger bands or Paracord. I would have to say that my first attempt came out at very nearly professional quality, with only a few design considerations that I might change in the future. The Kydex performed as expected, and took about 5 minutes in an oven at 350 to become the correct softness. IT took a little trial and error to get the technique down, but once I did, my sheath came out really good. It was super easy to use a heat gun to adjust and remold certain elements, and working with the tools I had was a snap, cutting with a band saw, and sanding went smooth and without error, The Kydex arrived very clean, and I just wiped down the smooth side with some windex before use and it stuck together like it's supposed to so when I drilled my Chicago screw holes, everything lined up nice I would add that this product seemed reasonably priced, for 8 12"x"12 sheets, you can make a lot of sheaths for a lot of knives. my BK9 design used up every scrap of Kydex (I needed belt loops), but if I forgo the belt loops, I could have easily fit 2 Bk9's on one sheet. Can't wait to try this on my other projects!

I bought the ABS sheet to cover a vent on the side of a home theater computer case to better control the air flow through the case. Earlier this year, I bought a sheet of the the same product in .0125" thickness for a similar purpose and found it difficult to cut to fit with the tools I have. I'm happy with my previous purchase but this time opted for the thinner material as it will do the job with less effort on my part. One side of the sheet is textured and the other is shiny. I plan to have the textured side exposed and was pleased to see that it was uniform and unmarked. The shiny side shows signs of production such as what seem to be tool marks. The marks are not deep and I suppose they could be polished out if desired but the fact that one side is textured suggests that the product is intended for uses where the shiny side is concealed.

I used this plastic sheet for reparing my Prius underbody, where the oil change splash-shield door fell off. It was easy to handle and cut to shape, and the results are perfect. This plastic is easily cut with a small pair of tin snips, but it is too thick to cut with normal scissors. It also could be cut on a table saw or with a hand held saw. The size I ordered (0.06) is about the thickness of a US penny. PLEASE NOTE!! This is NOT textured the same on both sides!! One side of this sheet is smooth and glossy and shows scratches unbelievably well. The other side is a mottled, textured plastic surface. Be sure this isn't a problem for your project.

This came just as described and worked perfect for my project. Cuts easily with a coping saw or jig saw and sands and buffs to a nice gloss black. It will come with a textured side and a smooth side the smooth side is the back so don't worry about a few scratches, even if you do need two perfect surfaces like I did...on the smooth side just sand them out and buff your going to be doing that to the edges anyway in most cases. Great stuff Highly recommend! Fast shipping and well packaged. Purchased from seller: Plastics 2000 Highly recommend A+ seller

My goal was to add pair of hidden speakers for new 4 channel radio system upgrade to my 62 corvette. The black plastic sheet, along with 4 inch PVC pipe allowed custom design and fabrication for Kenwood 1066s drivers obtained from Crutchfield, to mount hidden at base of front console. I've used these plastic sheets many times prior to fabricate y other projects. Easy to cut with Dremel 3 in sawmax with blade for plastic, and drill with 4 in circle cutter at slow speed.