Question 1

How do mw-p6510 and mwt-6510 differ?

Accepted Answer

The green tool cut to the left and the red tool cut straight or to the right. The tools work as expected on metal roofing.

Question 2

will these cut a brass kick plate ?

Accepted Answer

If the brass plate is not too thick it will be able to cut it easily, otherwise it will leave a rough edge.

Question 3

Would this be a good tool to cut hardware cloth/wire mesh? It says it's serrated which makes me think it might not work as well? Recommendation?

Accepted Answer

My lefthand and righthand shears are not serrated.  I don't know why sheet metal shears would be.  I suspect you have gotten erroneous information.  I can only offer my opinion about cutting hardware cloth with sheet metal shears.  I wouldn't do it, simply because I value my excellent sheet metal shears more than using them for a job for which they are not intended.  If you have a substantial amount of hardware cloth cutting, you might get lower quality sheet metal shears and just sacrifice them for that job.  The Midwest shears would do it, but I think much cutting of heavy hardware cloth would nick the edges and dull them.  If you have just a moderate amount of light to medium weight hardwar cloth to cut, you might use a set of diagonal cutters.  That is what I would do.

Question 4

Would these work for shortening a U-shaped aluminum bar?

Accepted Answer

Not very well and only if the material was quite thin, not what I would describe as bar stock. If it were me I would use a fine toothed hack saw or in my case I have a Fein Multi-master with a fine toothed metal cutting blade. These will not work on a U shaped stock without cutting both the upright legs first and bending the bar at those cut points to about a 135 degree angle to get these in where the jaws were not obstructed by the uprights. But again these are sheet metal shears not intended for thick material or shapes other than flat stock or where multiple cuts can be made for different directions that meet to effectively have been made in flat material.

ASIN	B00OCGQFP2
ASIN	B00OCGQFP2
Best Sellers Rank	#127,324 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #21 in Tin Snips
Blade Edge	सीधा
Blade Material	Alloy Steel
Brand Name	Midwest
Color	Red
Customer Reviews	4.7 4.7 out of 5 stars (2,509)
Customer reviews	4.7 4.7 out of 5 stars (2,509)
Date First Available	15 September 2023
Global Trade Identification Number	00727226130310
Hand Orientation	Left Hand
Handle Material	Metal
Included Components	1 x Offset Left Cut Aviation Snip
Item Dimensions L x W	25L x 76W millimeters
Item Type Name	Snip
Item model number	MWT-6510L
Manufacturer	MidWest Tool
Manufacturer	MidWest Tool
Manufacturer Part Number	MWT-6510L
Material Type	Forged Molybdenum Alloy Steel
Model Number	MWT-6510L
Number of Items	1
Number of Packs	1
Point Style	Round point
Product Dimensions	2.54 x 7.62 x 29.21 cm; 440 g
Product Style	Left
UPC	342388219965 738325231273 746767414840 370121612681 746767445943 054278391988 746767219643 746767284528 300717313128 746767219025 738325231280 746767221448 650715708670 738325231266 370121612698 343538259954 370121677840 746767219018 370121612704 746767220755 370121677833 654204697599 370121677857 726367087590 746767284511 746767219032 300717309688 746767284535 746767221431 342388206989 7272261303…
Unit Count	1 Count

MIDWEST Aviation Snip - Left Cut Offset Tin Cutting Shears with Forged Blade & KUSH'N-POWER Comfort Grips - MWT-6510L

Details

Details

Description

Specifications

Common Questions