UNO Project Basic Starter Kit with Tutorial and UNO R3 Compatible with Arduino IDE

I got the kit as my first experiment with Arduino. I've got some experience with micro:bit and Raspberry Pi, so I wasn't new to electronics kits, but this was my first foray into the Arduino world. As an aside, I prefer micro:bit because it is dirt simple for middle school students, but I'll review this based on its merits as an Arduino kit. The Arduino board worked flawlessly for me. It integrated with the Arduino IDE with no issues. The connectors seemed to be good quality- I had no issues with them. The breadboard connections seemed a little looser than others that I've used, but they were fine functionally for the projects I did. I worked through all of the projects in the zip file that I downloaded. I was able to complete them all successfully, and was able to use the IDE to make some improvements to the sample code. There is a superabundance of resistors in the kit - 120 resistors in seven different sizes. The samples only used ten resistors total, and eight of them were 220 Ohm. There also more LEDs than needed for the samples, so you can feel free to blow a couple up if you forget the resistors. Aside from the that, the kit included a nice variety of simple components, along with a photoresistor that wasn't used in the samples as far as I could see. The variety of the samples was sparse (I could only find 8), but a curious experimenter could have some fun trying to mix and match techniques based on the samples. However, for kids, more samples would have been nice. The documentation suffers from being written by folks who are not native English speakers, but it is not as bad as other kits I've used. I'm used to documentation like that, but it can be a bit confusing for kids. Fortunately most of the pictures are clear, with the exception of one or two places where pin markings were hard to read. Overall, I enjoyed the kit and was impressed by what I got for $20.

I love it. A very good quality UNO board. Everything else is also of more than decent quality. The breadboard is smaller than I expected, but big enough for most projects. I really didn't pay any attention to the breadboard size before ordering I just assumed it was the same as the one I just received from the same company, my bad you know. I ordered this kit mostly for the UNO board and some parts the are included. I need some, cheap, simple sensors and an UNO to check code with. The board fired right up, out of the box. I am using a TFTLCD display with SD card and all the examples work as advertised. I haven't run any other sketches yet, but I am confident they will all run correctly. I recommend this for anyone getting started with Arduino and or electronics. The tutorials that come with it are really basic and good for anyone with no or limited experience with electronics or programming. Enjoy and have fun. HAVE A GREAT DAY!!!

It’s a great kit for everyone beginners and experts I really like elegoo products they work well with all of my projects as I mostly build robot smart vehicles great items and quality for the price other brands are okay but you might need to make adjustments to your program and with elegoo I don’t have that problem

This is not the official UNO controller. Don't let that stop you though. I have used this controller for a variety of things that include auto filling coffee pot, programmable rope light controller, converter for controlling a gas fireplace with a NEST thermostat and many other projects. Some of these controllers have been in use for a couple years and still work great. I have purchased several of these controllers as a stand-alone and in a kit. The kit makes it an excellent choice for beginners and is at a great price point. For a few dollars difference, I have started purchasing the kit for all of the extra electronic hardware. This is an excellent tool for beginners, all the way up to the highly advanced. As far as development, this controller adheres to all of the standards of the official UNO, so there is virtually no difference and any documentation you find on the Arduino and ADAFRUIT websites apply to this controller without any changes.

I have bought several Elegoo Arduino clones and kits. I have also purchased genuine Arduino UNOs. As far I can tell these are very close to genuine Arduino UNOs. This kit is a very basic starter kit. I bought it for the breadboard, resistors and LEDs. If you don't want to buy a more expensive Elegoo kit, this is a good kit to start with. If you want to get started with Arduino projects, don't give up if things don't seem to work, you'll gain is good problem solving skills while learning about these versatile microcontrollers.

It's an Uno, just really cheap, but totally well made. If money is no object, shell out the dough for the Italian made original, and support the people who started it all. If you're on a student budget like myself, this is the one for you, this value is almost too good to be true for the quality you get. It comes with a mini CD, but if you don't have an optical drive you'll need to download software and documentation. For us linux people with aptitude, sudo apt install arduino...

I had to reduce stars for two reasons. The resister color bands are very hard to read and my breadboard requires a lot of force to insert components. Maybe a squirt of silicone will help with this last problem? In order to read the resistor color bands I needed a magnifying glass. Other than those two things everything I used worked. I’m just a beginner so I can’t comment on the more skill sets required or what this product limits are. I got it for model railroad lighting effects and it’s pretty fun to actually get something to work. There is a large library of free projects to help you get started with the programming. Overall this is a great product and highly recommended.

A good selection of components (jumper wires, LEDs, resistors, etc) to go along with the Arduino R3 Uno board and a very tiny breadboard. The breadboard is basically the same size as the Arduino board (about 3" by 2") so you may want to get a larger breadboard depending on what you would be using it for. The CD has an older version of the Arduino software where you code the sketches, and a PDF with a lot of basic projects to get you started out. All in all, a relatively good, inexpensive kit.

Great little starter kit and works a treat. However the manual comes on a CD and not sure how many people have one of those. I believe you can download the manual online. All in all good value.

Tiene un buen surtido de piezas ademas de que funciona si no te alcanza para el arduino 1

Üründen istediğiniz her şeyi karşılıyor. Eksik gelmedi. Teşekkürler

best for the starters including some additional components. Satisfied.. Cheers sender..

Het is een geslaagd cadeau.