SABRENT Dual-Bay USB-C 10Gbps M.2 NVMe SSD Cloner Dock (EC-SSD2)

I am genuinely impressed with this SSD enclosure. The first thing that stood out to me was the sleek aluminum cover design; it not only looks premium, but it also gives me confidence that it dissipates heat really well during use. Most importantly, it solved exactly the problem I needed it to solve. It read my SSD drive like a charm. No hassle, no issues; just quick and reliable performance right away. The build quality is excellent. It feels incredibly solid, almost tank-like, and the full aluminum construction makes it feel durable and well-made. It’s also very intuitive to use. I didn’t even need to look at the instruction manual. I especially liked the lever mechanism, instead of dealing with tiny screws to secure the drive, the lever locks it in place perfectly, which makes setup much easier and more convenient. As for value, absolutely worth it. Honestly, the enclosure itself feels so well made that it’s worth keeping even if the SSD inside ends up being corrupt or unusable. Highly recommended!!!

I use these to edit video directly off of and for storage. The first one I bought to put some 1TB SSDs I had lying around to work for a project. It worked well enough that when I later bought a 2TB SSD, I bought a second Sabrent specifically to dedicate to it, so I could keep large media on it and cut from it on my MacBook Pro. Real numbers, since "fast" is not useful: with a Samsung 990 Pro PCIe 4.0 NVMe inside, I measured 977.7 MB/s write and 906.0 MB/s read on Blackmagic Disk Speed Test from a MacBook Pro. That is the USB 10Gbps interface saturating rather than the drive, which is exactly what you should expect. Do not buy this hoping to see your NVMe's rated internal speeds. No enclosure on this interface will do that. What matters more for editing: it handles 4K and 8K ProRes 422 HQ and H.265 without issue, and Blackmagic RAW up to 8K. It only stops being viable at 12K DCI 60. I cut video straight off it without copying files locally first. The tool-free design is the real selling point, and it is not a gimmick. Most enclosures make you unscrew the housing, work the drive out, and reassemble everything just to change drives. With this one you press the button, the top pops up, and you swap the drive. No screws, no small parts to lose. If you rotate between multiple SSDs the way I do, that difference adds up fast. No heat issues at all, which was my main concern going in. NVMe drives in small aluminum enclosures have a reputation for cooking themselves, and I have not run into that under sustained editing work.

Pretty nice component. Had an extra 512gb nvme card from a swap and this works great as a scratch disc for adding photos to a photo frame. Install was straightforward, it includes a heat transfer pad (and extra one) and the finned all aluminum case is well made and feels solid. The outer area does warm up, but that’s exactly the purpose of the heat transfer process to air. It’s just warm to the touch. It comes with a C-C cable but I used an A-C as my desktop doesn’t have C ports and it works fine but a little slower transferring than the laptop with a C port and the included cable. It’s a non issue when just swapping photos back and forth.

I've never owned a product like this before so I have nothing to compare it to. My impression is that the enclosure is well designed and constructed of quality materials. It was very easy to install the M2 board in it. Performance has met my expectations. On a 55 Gb file transfer it achieved speeds of well over 900 Mb/sec. Not sure how this compares to other products, but I am happy with it.

Bought it o extraxt some files off my m2 ssd and it seems to work. Somehow it wont recognize on my desktops but on my laptop it was able to recognize… maybe desktops req some usb-c fw update… 4/5 stars Works on my laptop Failed on my 2 DT- probably my desktop usbc issue, not this device

This was the perfect enclosure to park my spare 500gb nvme ssd. the enclosure is slick, the button on one end opens up the enclosure easily and smoothly. Theres two thermal pads to transfer the heat from the nvme into the shell of the enclosure to manage heat. The indicator light is plenty bright and the cable works well. it was easy to install the ssd and it has standoffs for shorter nvme drives as well. when mounting a full size drive you get a smooth tool free instal. No fan so it opperates silently For the price i am happy with my purchase for sure. The cable is nice and short under 10inches long If your looking for an inclosure you could do way worse than this one.

Most products have clearly recognized brand names, making the buying decisions a bit easier between the usually more expensive brands and the cheaper no-names. The buyer’s best advice is usually you get what you pay for. Although not a household name, Sabrent is generally regarded as on of the most trusted brands of this kind of SSD enclosure. So when I needed one this week, but only for one task to clone my computer’s internal drive, I looked for this brand expecting to pay a premium price. I was pleasantly surprised to find this model down in the same price range as some of the ones with the really low ratings. What was I giving up over the Sabrent I bought last year for sixty bucks? WHAT’S THE CATCH If you put them side by side the difference is night and day. The premium model is much heavier, made of almost 100% aircraft grade aluminum while this model is part aluminum and part PVC plastic. But I also put this side by side with a really bad one that I didn’t even want to touch again, mainly because it was literally too hot to hold - imagine what it was doing to the expensive SSD inside. By comparison this one is much cooler, okay not as cool as the one that cost three times as much but at least it’s not going to set off any smoke alarms. Let’s face it, the two really important things are how cool it keeps the drive that it encloses and how fast the electronics inside let it communicate with your computer. A side benefit is being reasonably priced and it doesn’t hurt that it looks good. TOOL FREE if you’re going to put your SSD in an enclosure and never touch it again you can ignore this section. But if you have any intent of swapping the chip out a couple of times or more tool free can be a big issue. Why aren’t they all that way? There’s actually a good reason, if this enclosure is intended to safeguard your data drive through travel, exposure to the elements, prying hands, etc. having one that seals solidly shut is a good thing. This one is a prime example of superb design and simplicity. I only had to push one button to pop it open, slide the SSD into place and swivel a little plastic locking mechanism, no screws are needed. Then snap the lid shut and it’s ready to go. THE MISSING PIECE I have read the one star reviews that won’t accept this product because it doesn’t include the tiny set-screw. I’m not sure how to even react to that. Know this - it’s not needed, there is no place to use it. If you are using one of the shorter variants of SSD there is a small plastic plug to hold it in place, otherwise that’s what the full contact cover is designed to do. YES OR NO Data protection is no trivial matter. That’s not to say that this enclosure will protect the data on the drive it houses but it does play a part in the equation. This one works as it should and I couldn’t even imagine trying to save a couple of bucks to go with a no-name one like I did last time and nearly fried my drive. This is a winner.

I purchased this enclosure to repurpose an NVMe SSD as portable storage, and it couldn't have been easier to set up. The tool-free design is a huge advantage—just open the case, insert the drive, lock it in place, and you're ready to go in less than a minute. The aluminum enclosure feels solid and well made, and I like that it helps dissipate heat during larger file transfers. The connection has been reliable, and transfer speeds are noticeably faster than a traditional USB flash drive, making it perfect for backing up files, transferring large projects, or cloning a drive. Another thing I appreciate is how compact and lightweight it is. It slips easily into a laptop bag, so I can carry a high-capacity SSD with me without taking up much space. Everything worked as plug-and-play with no drivers or extra software required. For the price, this enclosure offers excellent quality and performance. If you have a spare NVMe SSD or need a fast external storage solution, this is an easy recommendation. It's well designed, simple to use, and performs exactly as advertised.

طلبت المنتج كما في الاعلان وتم ارسال منتج بديل بدون علامة تجارية وقمت بارجاعه

Boitier de bonne qualitée et débit bien suppérieurà une clé USB. Multi-boot avec Ventoy devient un vrai plaisirs.

Arrived in less than a week even after ordering from a different country. Package was sealed and had everything as described. Put in an nvme drive from my old pc so I don't have to fidged around with the motherboard on my new rig (I'm clumsy). Works like a charm!

I recently purchased the SABRENT USB 3.2 10Gbps Type C Tool Free Enclosure as a way to keep my additional NVMe as a compact and fast storage device, and I couldn't be happier with my purchase. The tool-free design made it incredibly easy to set up and the transfer speeds are incredibly fast thanks to the USB 3.2 10Gbps technology. The compact size also makes it incredibly portable, perfect for taking my additional storage with me on the go. I highly recommend this product to anyone in need of a high-quality and reliable external storage solution. Thank you SABRENT for creating such a fantastic product!

Jedyne plusy: Obudowa wygląda solidnie, a jakość wykonania — zarówno na zewnątrz, jak i wewnątrz — jest zauważalna. Beznarzędziowy montaż jest bardzo prosty (choć ma też swoje wady, o czym poniżej). Być może dla kogoś podniosłoby to ocenę do dwóch gwiazdek, ale nie dla mnie. Już przy pierwszym użyciu zauważyłem, że dołączony kabel USB rozłącza urządzenie przy nawet najmniejszym ruchu (może po prostu trafił mi się wadliwy egzemplarz, więc użyłem innego kabla wysokiej klasy), ale to był dopiero początek problemów. Urządzenie co jakiś czas samoistnie odłącza się od systemu. Podczas operacji na plikach doprowadziło to do uszkodzenia tablicy partycji. Zauważyłem też, że dołączony termopad jest za cienki i nie styka się z żadnym z moich dysków NVMe M.2 (Intel Optane 1TB, Samsung Pro 990 2TB, Samsung Plus 990 1TB, Crucial P3 1TB). Ponieważ brakuje tu oddzielnego radiatora, temperatura wewnątrz jest zbyt wysoka — to właśnie wada konstrukcji beznarzędziowej. Co prawda mieści się ona jeszcze w granicach normy, ale... zastosowany chipset to RTL9210, który jest powszechnie znany z awaryjności, zwłaszcza przy wysokich temperaturach. Inny chipset, lepszy termopad lub dodatkowa płytka radiatora rozwiązałyby problem. Spędziłem 3 dni na profesjonalnym odzyskiwaniu danych z uszkodzonej partycji, korzystając z moich pozostałych obudów topowych marek — nie było żadnych problemów. Dodałbym zdjęcia, ale byłem zbyt pochłonięty ratowaniem danych. Analiza: Technicznie obudowa trzyma parametry. Przyczyna nagłego rozłączania - urządzenie podczas pracy (kopiowania) przechodziło w sleep mode, co nie powinno mieć miejsca - to kolejna wada tego kapryśnego chipsetu.