Store-It-Out Prime 4.3 x 3.7 ft. Outdoor Resin Storage Shed with Easy Lift Hinges, Perfect for Yard Tools, Pool Floats and Garden Accessories, Black

I’m a 65 yr old woman and put this together in about 40 minutes by myself. The only tool I needed was a cordless screw driver. Nice product and very easy to assemble. Instructions are basically pictures but common sense tells you what to do. Large storage area. I highly recommend buying this one.

The parts arrived in remarkably good condition. Not a scratch or aberration on any of them. Assuming some prior diy on these things, it was very easy and quick to assemble. The main risk is over tighten the screws. I did that one one of them, but that was the only mishap I am aware of. A little bit of sticky tape on hand to hold the back in place while securing helps if assembling alone. It is a very easy task overall as the instructions are clear and simple. It is not particularly study. Adequate, but not special. The floor either needs to be level or made that way. Otherwise you will have door issues. I may eventually put a bit of concrete under the low corner. For now, it has a shim there. If one needs more sturdiness, adding an strong interior shell would be the way to go. I use this to hide garden items that are otherwise an eyesore when not in use. On that score it does well, it looks good, and the eyesores are now hidden inside a much nicer looking item.

Based on other reviews, I was concerned about damaged parts, and was temporarily relieved when the box arrived completely undamaged; unfortunately one of the walls was broken. I contacted Keter via their website and provided all required documentation (while they provide a phone #, they tell you you'll need to go to the website anyway). Upon submission, their system response is "we'll be in touch if we need more information". I've never received any communication from Keter. I did assemble some pieces and found the metal support bar was ~1\4 inch too long. Cutting the bar also meant redrilling holes that no longer aligned. While the look is nice and the size perfect for large garbage/recycling cans, the doors flex and seem under-designed. UPDATE: Replacement wall did arrive ~3 weeks later in good condition.

I was going to buy another plastic shed from the same seller that I got the last one from but I found this shed for $80 less. I figured the build quality would be roughly the same but boy was I wrong. This thing is built like a plastic trash can with hinges and a latch, very lightweight, very flimsy and I doubt it will hold up well. If I had paid about $100 it might be worth it but $180 is just too much for this poor build quality. I bought this for my electric lawn mower so we'll see just how water tight it is. It was easy enough to assemble but engineered poorly so some of how it's designed just doesn't make any sense. With the side vents near the top I suspect any wind is going to blow rain right inside of it and since the bottom is tub like it's not going to drain if rain does blow in. Really the only thing I can see this being useful for is to keep trash cans in otherwise it's just not very useful. Definitely would NOT buy again. *Update* I noticed today that after sitting in my yard for 2 months there's a big crack in the bottom pan so now the floor isn't even water tight. I regret wasting my money on this garbage.

Not that difficult to put together, BUT I was not able to have it put together for several months, I did not check it for damage, I opened the box a few weeks ago and the corners of the lid were total destroyed as if someone threw it, needless to say I was not happy, I took a chance and called Keter and got a very helpful CSR named Gina, she told me to take a picture and send it along with the receipt and they would check into it. KETER sent me a new lid free of charge. Thank you Gina and Keter. will continue to buy your products.

For the price and the brand name I had higher expectations than what I received. Some background on my, i've been a consumer product designer with a focus on injection molded parts for almost 25 years. So products like this are right in my wheelhouse, therefor my feedback isn't just the average homeowner. The package arrived 2 days early, hooray Amazon! The box faired ok, but a couple of the corners were crushed and another spot had a tear/gouge into the carton, but the plastic directly behind that area was ok. I had the package laying flat on the ground and as I went to pull the assembly out of the box i grabbed what ended up being the base and as i pulled the plastic ribbing on the underside cracked as i pulled. So I stopped and shook everything the rest of the way out. This immediately set off the red flags on durability....both due to a combo of their material selection and wall thickness and ribbing design. I did find another piece of broken plastic floating around in the box which appeared to come from the cover as it was light grey in color. Another disappointment. Fortunately it wasn't functional or an aesthetic area. The unit went together super easy. You can see by my photos i had a unique use for the setup. Only issue with assembly was that i didn't care for how they did the back panel. In my installation scenario, all the sides are exposed. So the way they designed the back, half of it looks like it should and the other half looks like it's inside out because it's the same 2 pieces, they just have it flipped for 1 half. Great way to save money on tooling and molding, but it looks like poo for free standing installs like mine. Other note for assembly is using a electric driver will make quick work of installing the screws....just go easy and don't overdue it or you'll strip the plastic in a heartbeat....so go slow! I built a picture frame pressure treated base with cross members for my install because it's installed in the woods next to my cabin, so i wanted an even flat surface. However, the base still feels "soft" even with the cross members below it. So beware. And i say that because in one of the steps they show a person kneeling inside to install the screws....not sure i would suggest that as cracking the base would be likely. Overall it will keep the rain off the electrical components inside, but i'm not sure how this will fair during and after some UV and a Wisconsin winter of snow...TBD. I think they could have chosen a more robust plastic and maybe improved some design elements to further increase durability. I have a 10+ year old Rubber Maid branded 8'x10' shed at home and it's far more robust than this and the plastic definitely has way more give than this PP (polypropylene) that they used.

We live in the mountains and have this storage in our front driveway. It has survived snow, rain, and sun. The top lid is very strong and still works perfect. The front doors are thinner and more fragile, and sometimes do not fit in the holes, but once it warms up again they can be put back into place. The doors are large and makes it easy to put our gardening supplies and even our electric snow blower inside. Some dirt does get in so if you want something sealed, maybe look at another option.

This is a very well built storage box. Assembly was a snap. My handyman told me he has assembled many of these types of storage boxes in the past and this one was the best he's seen. He put it together in about 40 minutes. The parts fit together without a glitch and the lid and doors are aligned perfectly. The appearance is actually better than pictured with even seams and high quality material.

Well delivered early and came well packed easy to put together very happy with it

Buen material plástico resistente. Fácil de armar.

Have had one of these before and are very good quality. Paid to,have it assembled.

La caja mágica pa esconder tu caos exterior, donde metes bicis, herramientas y sueños rotos sin que los vecinos juzguen. Resistente, con piso elevado pa que no se inunde tu miseria acumulada. ¡Armalo y transforma tu patio en bunker apocalíptico: ahora tus chatarra tiene hogar, y tú, paz ilusoria hasta que revientes la puerta buscando la podadora perdida!

Beschermt al 3 winters mijn tuingerei.