ATE Typ 200

I ordered 2 of these just in case I still had like 3/4 left of 2nd can. They will last forever high quality and love the can it comes in. Easy to store. Color is clean looking and true great performance so far no issue. No leaks grease quality same heat resistant guarantee and performance can’t complain. Speed of breaking responds pristine! May be on the high side but not overly priced for high heat resistance and performance!

got this for my 4runner where the rear brakes run hotter than the front. in mountain driving noticed they were exceeding 200F. I wanted a brake fluid to handle high temp and resist water absorption. Import from Germany and meets Toyota spec. SHould have good longevity, color is clear, and rated as performance fluid.

Great product but more so, it is priced reasonable compared to its competitions.

This Brake Fluid is top notch. It was highly recommended to me by various Retail Automotive suppliers.

Having tested numerous brands, I can attest that the ATE Original TYP 200 is in a league of its own. It works well and truly delivers on its promise of racing-quality performance. What impressed me most was the immediate improvement in braking feel; the pedal was noticeably firmer and more responsive. Its key strength lies in its exceptional heat resistance. With a high dry boiling point, this fluid maintained its integrity under hard use, preventing any spongy pedal feel even during extended, spirited driving. The performance is tangible, instilling confidence in the braking system's ability to handle high-stress situations. The longevity is another major plus. Given its robust formulation and high boiling points, this fluid has proven its durability over time, making it a reliable choice for extended service intervals. The product arrived in perfect condition, and its amber color helps with visual confirmation during a fluid flush. Considering the enhanced speed and responsiveness of my braking, alongside its longevity and reliable performance under pressure, the value this fluid provides is outstanding. It's a genuine upgrade for any vehicle.

Good wet boiling point. After trying this out for track days a few years ago and finding it works well I switched for my daily drivers and bikes It will out-gas when severely overheated but by then your brake system is ready for a refresh so fresh fluid is the least of your costs. I just wish they still had the blue color as i used to alternate to ensure a complete flush.

all right, this is going to be a bit convoluted, but I feel the public service is needed for people to avoid the same ordeal I had. I'd used ATE typ 200 in my older 2003 A4 and it was great. I didn't bother with it when I had my 2013 S4 because I was using Castrol synthetic Dot 4 that worked well and came in 12oz jars so i could add a little extra to my bleeder to make sure i totally flushed the old stuff. That doesn't seem to be available any more, so I went back to this one when I got my 2022 911 992. That was a mistake. Now, on the reservoir cap, my 911 says just "dot 4" (and the manual is useless, just tells you to go to a dealer). However, while I had not kept up to date with the latest stuff on brake fluids, i had heard something about "low viscosity" dot 4 fluid, and THAT is what is actually needed on my car, and really, most modern cars with ABS and traction control systems. Why? Viscosity is how thin it is, how easily it flows. Normal brake lines have a set diameter. However, when fluid goes through ABS modules, it flows through smaller holes and lines. So it needs to flow easier - with lower viscosity, especially at low temps. Otherwise, it could develop air bubbles as it struggles to flow through. Regular dot 4 has a -40 Celsius rating of max. <1500 mm2/s. DOT 4 class 6, aka, LV is half that at 750. I didn't do this research ahead of time. I bled my brakes with the ATE typ 200, and when i got in my car and pressed the brake pedal, it squeaked to high heaven. So now i need to rebleed them with LV fluid. Having said this, if you are tracking a car, it probably doesn't matter because at upper temps, like what you see while tracking, the viscosity is pretty similar. But for regular driving, probably want to stick with LV fluids. ATE has an LV version, as does Pentosin. Bosch's regular dot 4 ESI6 meets the specs too, but it's not labeled as LV for some reason. Just read the specs. look for a viscosity rating of <750 mm2/s at -40 Celsius. I rated this a 4 because it IS great dot 4 brake fluid. However, it seems to be the only one that causes that squeak with newer cars, while other dot 4s do not have the same number of complaints. and like i said, I didn't have that issue w/ my Castrol on the S4.

Wish it was still blue but still top notch stuff

I use this on the track and never had brake boiling or fade. I don't think it works quite as well in clutch system on my car as the brakes, but still great fluid and only slightly more expensive than the standard ATE fluid with a much lower boiling point.

El mejor dentro de su gama y precio. No hay rival.

Pretty good brake fluid

チューニングショップや日本で知名度のあるブランド品はもっと高価ですが、街乗り用としてこの価格でこの性能のものは他にないと思います。吸湿後の性能も高いので、交換を失念していても安心です。

Produit bien connu