expandable sleeving

Always happy with this purchase no matter the size I get. It served its purpose and gives my wiring a clean look.

I recently purchased the Alex Tech 100ft 1/2 inch PET Expandable Braided Sleeving in black, and I am extremely pleased with its performance. This product has proven to be an excellent solution for managing and protecting my cables both at home and in my vehicle. **Quality and Durability** The braided sleeving is made from high-quality PET material, which offers excellent abrasion resistance and durability. It can withstand temperatures ranging from -103°F to 257°F, with a melt point of 446°F, making it suitable for various environments, including automotive engines and high-performance audio systems. **Ease of Use** One of the standout features of this sleeving is its expandability. It can expand up to 50% of its nominal diameter, allowing it to easily cover cables, hoses, and wires, even those with bulky connectors. The flexibility of the material ensures that it can conform to various shapes without compromising its protective capabilities. **Versatility** I have used this sleeving in multiple applications, such as organizing the wiring harnesses in my car, protecting HDMI and audio cables in my home theater setup, and even tidying up the cables behind my computer desk. Its moisture-resistant properties prevent rot and fungus, ensuring the longevity of the cables it protects. **Installation Tips** For best results, it is recommended to cut the sleeving with a hot knife to prevent fraying. If a hot knife is not available, searing the edges with a lighter or another heat source works well to maintain the integrity of the sleeve. **Overall Experience** Overall, the Alex Tech expandable braided sleeving has exceeded my expectations. It is economical, easy to install, and highly effective at prolonging the life of my cables. I would highly recommend this product to anyone looking for a reliable cable management solution. This product has been a great investment in keeping my electronics organized and protected. I am thoroughly satisfied with its performance and durability.

I bought this for my tig torch cables to keep them covered and together. Working good so far.

The ends fray pretty quick, luckily we had heat shrink tubing or this would have been a mess. I would give yourself a little extra length so you can melt ends together or use similar stuff we did.

Great product, unfortunately I ordered the wrong size and barely used any of it. Made most of my wiring job look very clean.

Cool wiring loom material, price point was great. The only drawback is the ends . Once you cut it, you have to deal with the ends unraveling. I used a lighter to try and stop it.

This is good sleeving for holding wires in place. You need to know how to use and make this work for you without being a disaster. I should make a video,to explain how to use this technique and product to provide an understanding of how it works. This is great for planned projects, it will organize and keep your circuit clean and secure. It will hide all the cables or wires in a nice way that ie easy, and flexible. Super lightweight and easy to use after you understand it.

My new kitten is of the opinion that power cords are great chew toys, so I've gone through about 350ft of braided and split tubing to cover pretty much every exposed wire/cable in my house. Since I struggled to figure out the appropriate size of the braided tubing to buy for which cables, I wanted to leave a review with some standard items for reference. I started with 3/8", and that fit my laptop chargers (one Dell with a straight end and one HP with a small L end), GameCube controllers, TV power cords (the kind that unplug from the TV), and several other similar cords perfectly. It fit the more streamlined Metabridge HDMI cables like a glove (the only tricky part was getting it started over the plug), but was just a bit too small to go over the squared-off ends of the Amazon Basics HDMI and generic HDMI that came with my DirecTV setup. It probably would have fit those except it got jammed up in the gap between the metal plug and the bulky plastic casing so it was impossible to get started. It's too small for a standard wall outlet plug. I used 3/8" for my assorted device chargers (iPod, Kindle, Samsung phone, etc), but you would probably be safe getting 1/4" if that's the only thing you need to cover. I don't know what else you would use 1/4" for except if you have a cable with no connector on the end. It has to be tiny. To make sure I could cover some larger plugs, I ordered 3/4" next. That is HUGE compared to 3/8", expands much more for its width, and was total overkill for the few standard wall outlet plugs and Nintendo 64 controllers I used it for. For bulkier plugs like RCA cables, bigger wall plugs, and a power cords with accumulators, it was still a bit big, but that meant it was much easier to get started. If you don't mind the weird look of a huge flat ribbon over smaller cords, 3/4" should fit pretty much anything in your house. I'm saving the rest of that for whenever I get behind my larger TV and want to bundle its wiring together. Update: 1/2" does NOT fit standard wall outlet plugs. It would barely fit over the plugs on my N64 controllers. That size would be good for larger HDMI cables and the like, I'll have to stick with 3/4" for everything else. Random notes after having spent a week of my life kitten-proofing more cables than I knew existed in my house... Make sure you have a lighter and preferably needle nose pliers on hand. Run the lighter under the end right after you cut it, then use a pair of needle nose pliers, the closed end of your scissors, or something metal to push open the end while the plastic is still melty. (You don't have to go overboard melting it to keep it from fraying.) I'll echo a couple other reviews and say that, to make it easier to get started on big plugs, wedge a pair of needle nose pliers in the end as far as they'll go, then run your lighter around to melt the edges, let it cool, and it will stay open. I used zip-ties to hold the ends in place, and those pulled the widened end back together nicely. If you're not sure whether to get the split or braided sleeve, the first question to ask is if you need to fold up or tightly coil the cord. If yes, get braided. Split is great if you will frequently need to remove the sleeve or where you want the sleeve the same size as the cord without having to account for a plug, and much easier to bundle multiple cords together in, but split will start to come apart if you fold/bend it tightly. Braided is also a lot cheaper. Lastly, do NOT try to pull the sleeve to get it to move! PUSH the sleeve onto the cable, letting it expand and wad up to where you're holding the cord with your other hand, then let it expand down the cord. It should be pretty self-explanatory, but I'm sure there are YouTube videos if you need more help.

Los cables quedan perfectamente guardados, fácil de usar y manejar.

This stuff is possibly the best way to cover bundles of electrical wire or anything that still has at least one end available to push it on to. I love this stuff. It takes a few moment to get the hang of using it but once that is figured out it almost flows over the wires or cables that you are using it on. I used to to cover and protect a wiring harness for a skid steer I was re-wiring. It is not as tough as the hard plastic split wire loom stuff but it serve my purposes perfectly. Highly recommended.

I used it for microphone cable to provide additional insulation and strength to an XLR cable. The sleeve enables the cable to also keep its coil and twist that ultimately improves the life and performance of the cable. Ive used it with cables of both 5 and 10m long. The longer the cable the more benefit the sleeve gives to it. Mine was used with Van Damme XKE terminated with either high quality Neutrik or Nanotech connectors.

Fácil de usar, cuando hago la instalación de cada linea de mi camioneta le da un mejor acabado y no necesito meterle cinta o cinchos 👍

After reading an article in Fine Woodworking Magazine where the author had used this exact product to reduce damage to his vacuum hoses. I decided to give it a try. It works better than I could have hoped. The hoses it covers are from an old Kirby Vac and a Nilfisk vac. There is no significant catching on the back edge of track saw tracks and with a small nylon plate I had made up there is zero catching. I also use this on a dedicated Hegner finger joint machine. I believe the only reason this is not fitted to all industrial hoses is that it would limit the sale of spare parts hoses. All the best.