UCA222 USB Audio Interface, 2x2 RCA to USB Converter for Analog-to-Digital Audio Recording on PC and Mac

So first of all this interface straight out of the box is of sturdy construction and comes with the required usb to hook it up. It provides 48v of phantom power to my DI box no problem, and the preamps have a very distinctive texture that in my opinion are second in sound qualiry only to Audient, who are very expensive and give you less inputs and outputs for your money. Both preamps are that weird hybrid kind that accept both jack leads and xlr cables, possibly more but unsure as i only tend to use those two. The pad that you can toggle to set the preamp to line level or instrument level is pretty nifty and could save you from having to use a di box depending on what you're plugging into it. Direct monitoring is pretty cool too you can switch between stereo and mono, very useful when you use headphones, and can also adjust the mix to the point where you can only hear whats going into the interface, or what's coming out of your DAW, and any blend of the two. As well as the headphone jack on the front it can also have i think it's two sets of monitors hooked up to the back which can be switched between on the front of the interface. Only drawback personally is that the LED system to check levels and clipping is ony like, two lights one green one red but that's fairly common amongst interfaces in and beyond this price range. All this coupled with the fact that it'll probably outlast my laptop and has midi ports on the back, makes me say that this is the ideal audio interface for producers/recording engineers, etc, who are starting a home setup, want a lot of options in terms of functionality and dont want to upgrade for a long time. And it's extremely useful for people of all levels as a portable interface. Fantastic piece of hardware for a fantastic price.

I’m using this to record my old vinyl records into digital files which I can play on my phone and other devices. I’m very impressed by it. My record player is connected to my NAD3020A amp. I’ve connected the Behringer UCA222 to the Tape ports on the back of the amp using my own amp cables, and then connected the Behringer to my Windows 10 laptop using its USB cable. On my laptop I’ve installed the free Audacity software for doing the recording. It’s all working wonderfully. I’m very impressed by the sound. Of course, you are not going to get the quality of a modern high-definition audio recording, but I think the Behringer is giving a very faithful recording of my records. Setting up was far easier than I expected. Other than downloading Audacity, I didn’t need to download any other software or drivers. The only glitch was that the sound was initially being processed by my laptop as mono. Looking some helpful reviews, I realised I needed to change to the settings for this recording device to “2 channel 16 bit 44100 Hz”. To do this on my laptop (others may differ slightly): open the Control Panel; from the Sound menu choose Sound Control Panel, then choose Recording. From the Sound pop-up window, select Microphone 2-USB Audio CODEC to open the Microphone Properties, then select the desired 2 channel 16 bit setting from the Default Format panel. Having done that once, I have not needed change it since. Although no software is supplied with the UCA222, the recommended free Audacity is good. It looks a bit daunting at first, but the basics are pretty simple, with an interface similar to a tape recorder. And there are some simple inbuilt tutorials to guide you through some other things you might want to do, such as click removal, channel balancing, track marking, and removing inter-track noise. I was hesitant to buy the UCA222, having read some of the reviews that encountered problems. However, for my needs – recording records via my amp – it’s working superbly.

Quick Summary: Positives: + 2 XLR inputs + Extensive hardware controls + Supports mono and stereo output via a hardware switch + Low latency headphone monitoring + Works on Linux + Amps produce a clean signal until just below maximum gain + Good range of outputs + The price + Good build quality Negatives: - Amps are sufficient for dynamic microphones but not impressive in terms of volume. - Powered over USB only - Possible buzzing at maximum gain I am giving this interface 4 stars because it is a good product for its price. However from the perspective of someone using a dynamic microphone, the low amount of gain is a shame. I have not tested this interface with a condenser microphone so I cannot comment on the phantom power. Starting with the good, the interface is of good build quality, it is made from metal and feels sturdy, in terms of the casing and the knobs, I don't feel as though I would accidentally damage it in normal use at all. 2 XLR inputs is always nice to have, and these are both monitored separately. The headphone monitoring is quite good, there is a bit of noise, however the latency is very low, it feels instant to me. Mono and stereo output is supported via a hardware switch, which is nice as other interfaces will often only allow you to change this in software. The amps are good in terms of signal quality, I find that they are very clean right up until you turn them to max gain, where electrical buzzing can be heard. My favourite part about this interface is that it just works on Linux. I have found issues with other interfaces such as the scarlet solo 3rd gen, where linux will not allow you to have a mono signal, so the microphone would only be heard from one channel, ie one ear for headphone users. I have had no such issues with this interface, and I can control everything I need from hardware which is a big plus. Unfortunately this interface is powered over USB which limits the power of it's amplifier. The overall gain for dynamic microphones is quite low, I am not sure what the exact measurements are, but it certainly doesn't feel loud, however it is likely just fine for instruments and singing, for spoken voice it does okay, but it would be nice to have more volume headroom, not that this interface is any worse than other USB interfaces in terms of gain. I do hear some occasional electrical buzzing, but I am not sure if that is the fault of the interface or not. If you are okay with the drawbacks, this is a great interface for the price and I can recommend it.

This is a highly rated interface. So far it's living up to my expectations. Crucially it's class compliant which means that it worked with Apple workstations and iPads and iPhones right out the box. Only Windows needs drivers.

Solid, reliable and just fantastic value. Utterly brilliant

Im only using this device in a limited way, based on the description of what else it can do. It is taking the USB output of my laptop and converting it to an optical output, which I am sending to some active speakers, and also it gives me headphone output. It's a brilliant bit of kit, it works without drivers plug and play. The optical output allows the better DAC in the speakers to give high quality sound. But also the direct headphone output (which uses this products own DAC) deserves credit. I was using an Arcam rdac which converts from USB to headphone output, which gave very good audio quality, however this device though perhaps not quite as good is much (much) better than the headphone output on the laptop. I mainly purchased this to go from USB to Optical and it works perfectly. It also has RCA outputs and inputs which i may use later, it all looks very well made so no doubt they'll work fine as well. Top product. Update - 10/10/2024 - I am now using the RCA inputs to take the audio from a TV, and the RCA outputs to go to a smaller speaker in another location. Such a brilliant device, 2 inputs (USB+RCA), 3 outputs (Optical, RCA and 3.5mm headphone). Still working perfectly and all powered by USB. I can listen to Teams meetings over headphones, music with the optical out to a nice set of speakers, listen to the TV mixed into my laptop output, and listen to meetings in another room using the RCA outputs. I might even buy another one as a spare.

Excellent quality breakout box, this Barringer audio amplifier, is a good quality, which I use as a breakout box within my radio station for Internet radio. This provides good audio quality, and is easy to use, and extreme Line design means it’s highly portable but this does not take away his ability to provide great audio. Does require a small amount of power via a USB lead, or just plug it into the back of a laptop and it works well. I’ve not experienced any difficulties for the purpose I bought this for that being a breakout box to take audio from my radio station, and to stream it over the Internet for an online radio station. Some understanding of sound processing is required,

I bought this to enable a stereo line input on my laptop, which like most modern laptops lacks such a facility. It works out of the box with no need to install drivers, although you can install the ASIO For All software if wanted (a separate and free download). You will almost certainly need to go into the Windows sound device settings and configure it for two channel (stereo) recording, since Windows seems to assume all sound input is mono. It has a "monitor" facility, which means you can plug in headphones to the 3.5mm stereo socket on the back of the device and listen to the sound it is capturing, a useful feature. Stereo recording and playback both work very well and bypass the limitations of standard laptop sound hardware with ease. Out of curiosity I wanted to see if it would work as a souncard oscilloscope input. I already have a "real" oscilloscope so don't actually need such a thing, but it does perform reasonably well as a two channel scope, albeit limited to audio frequencies (20Hz to 20kHz) and 1Vrms signal levels. The sampling rate and Windows recording volume settings need tweaked to get this working well, 4 to 8kHz sampling rate and volume setting of 35 resulted in a 1kHz sine wave being well displayed on my laptop. It's obviously not in the same league as a proper scope, but for simple work on low level audio frequency signals it could be useful at a fraction of the cost. This doesn't come with any software CD. I already have Audacity installed on my computer and it works fine with that. I am no audiophile so I cannot say how it works with other applications, but for my purposes it works perfectly and the price is hard to beat. Possibly those requiring more sophisticated studio level facilities will want something different but for casual home use it really is a winner and I don't hesitate to recommend it.

A lot for your money. There are many products that are less complete for a bigger price. The Insert port on the back really is a great addition. Love it!

Interfaz básica pero perfecta para sintetizadores, ya que no requiero preamplificadores. La calidad llega hasta 16 bits pero nadie notará la diferencia en trabajo casero. Excelente producto.

何世代か古いWindowsでも対応しドライバー要らず、USB接続で直ぐ認識した。壊れたPCIe高音質オーディオカードの代わりを探しこちらの製品コメントを頼って購入。入力端子があるのもポイントだった。視聴してみてこの価格で高音質は驚き。だがASIOはなんちゃってだった。それでもこの高音質。 まず製品のメーカーサイトを検索すると日本語サイトが頭に出るが、ドライバーのリンク先が切れている。改めて英語圏サイトからダウンロードすると、なんと汎用フリーのASIO4ALLで最新版の1つ前。オーディオ編集ソフトで再生するとプチプチノイズが乗るため本家ASIO4ALLから最新版を入手して解消。 コレはアリです！

Great

werkt prima