Kurust Rust Remover for Metal

Worked like a dream. quick and easy to apply and neutralised the rust on my tow bar brackets. A little goes a long way so don't dispense much at a time. It's also a watery liquid and drips easily, start from the top and word down using the running liquid as you go. It turned the metalwork blight blue before drying to a black finish ready for painting.

An excellent product, just paint it on and the rust turns black in a few minutes - and doesn't rust again

This stuff is not bad. Not quite 5 stars though. I have included a before and after of the frame of my front door which was very, very rusty, due to the displacement of the seal around the frame. The 'after' was after two thin coats of the rust converter, with an hour's drying time in between. Though runny, the liquid is quite easy to apply. Firstly, as other reviewers have stated, pour a small amount onto/into a separate container - I used a teacup saucer. This prevents any contamination of the remaining unused liquid. Before applying, lightly remove any surface rust with gentle sanding. Apply in thin coats with a small artists brush, if you are covering a small area like me. Leave to dry. I would suggest at least 30 minutes - then apply another coat if necessary. Though the liquid did not quite convert all the rust to the required smooth surface area I was hoping for the results were pretty good. It remains to be seen how it performs in the long-term...

Haven’t used a product like this for many years; the technology must have moved on over the decades, as this product worked very quickly & cleaning the brush was easy.

Kurust has been available for years. It has lasted the test of time because it is easy to use, works visibly and quickly and you can overpaint it in 3 hours. I've tried all the various rust cures. Some are fussy, some work over 24 hours, some require rinsing off, some are slow and some don't do much at all. I've not found anything better than this one. You do need to overpaint it when cured and Hammerite paint is probably the best to use.

Just the job turns ryst into a solid base for soraying

Great stuff does exactly what it's supposed to do

dose the job very well do wear gloves and a face mask as it can get messy put paper under the aera you are working on good value great rust remover a wire brush is useful good stuff