Wahoo RPM CADENCE Sensor

I recently bought a myx bike second hand and realized pretty immediately that there was no way for me to know how fast I was pedaling (you would think that's a basic feature the bike would come with, right?!) Anyway, after researching different cadence trackers, I decided to go with the only one that would pair with the bike (this one). Ultimately, I wanted something that wasn't bulky like the one with their own screens so I but the bullet and bought the expensive option. Installation of the product was very easy, the bike was able to detect and pair with the sensor flawlessly. It is designed very sleek so you don't even notice it (attached to the inside of your pedal). Based on the speed of the videos and my pedaling, the reading seem to be accurate. It's just nice to be able to see the cadence right on my screen instead of having a separate attachment. I know the sensor has other features like tracking data on an app, but I don't use that feature. The only thing that bummed me out is that the battery it came with only had 20% battery.

I bought this for my Schwinn IC4 Spin bike. A GREAT spin bike by the way. Instead of buying a Peleton that limits what apps you can use to train, I bought the Schwinn and a refurbished iPad from Apple. I’ve been training using both the ZWIFT app and Apple Fitness's Spin classes. The only bummer about this spin bike is the cadence (RPM) readout only gives you a “range” and not a specific RPM measurement. The spin classes I do instruct a specific target cadence so I wanted something to narrow that down for me with this spin bike. I Google spin bike cadence devices and the Wahoo was one of the top rated. It was only $30 or so that made it low risk. It works great! You download the free app. Synch the device to the app. Then attach the one device to your shoe or one of the bikes crank arms. They give you a piece of double stick tape, zip ties and a bracket to hold the device to your crank arm, and another gizmo to attach the device to your shoe. Since it has a 2032 battery that I have no idea how long it will last, I chose to mount it to my crank arm using a small velcro patch. That way I can pop it off real easy if/when the battery needs replacing. It works great. I put my phone on top of my iPad and once I start cranking away the cadence shows up. I don’t have to resynch or anything, the readout on the app populates immediately. I was hoping to also be able to open the Wahoo app on my Apple watch but apparently that is not an option. No biggie… Two thumbs up!

Easy to install, app functions well with Android. I bought this for my bike that I have set up for indoor riding and to use with the Peloton app, which I read a lot about and has worked for many people. The thing I didn't considered until using was it's usability with Android. The wahoo app works great with Android but the Peloton app does not show cadence for Android users. So, I can only have the audio on my phone for the Peloton class while having the wahoo app open to watch my cadence. I'm working around this. Just wanted to let others know. Something I didn't like about the app was that it can not connect or send the riding information to my fit bit app directly, which means I can't record my cadence on fitbit and attach my cadence to my heart rate. My way around this is I send everything to my google fit app. Wahoo works great with the google fit app! I do recommend, getting the speed sensor and the heart monitor if you are interested in measuring your progress in terms of distance or calories burned as the cadence does not allow for this. Over all great sensor! But would like the app to be more compatible with other 3rd party apps, maybe other apps similar to Peloton that you can use the cadance for!

I haven't tried out any of its more expensive peers but I like this for what it is. It's affordable, easy to install, small, and broadcasts right to your phone. First some background, I use this on a Spin Bike in my garage. I Spin with this keeping my cadence, and using the Peloton app on my iPad for the class itself. It's a great workout and a good way to stay in shape without having to leave your house to do it. Is it easy to install? Yes. It comes with an adhesive strip as well as a cradle (if you prefer to attach it that way, I did not) that you can use to attach it directly to the crank arm of your pedal. It pops right on and I've had no issues with it staying on whatsoever. If you need/want to you can easily remove it and buy new adhesive tape from your local hardware store or CVS to reattach it somewhere else. Is it easy to get it on your phone? Yes. You just download the Wahoo Fitness app, turn on Bluetooth and connect it to the piece on the crank arm. It comes with a little metal wand you wave over the device to activate it (how it does that I don't know but when I waved it over it, it worked). You then go through a few steps to set it up the app and your (free) account and you're all set. After that when you want to use it you just go into the app and hit start workout and you're good to go. Is it accurate? To be honest, I don't know. It's definitely on a bit of a delay, you can see at times the cadence doesn't drop or increase as quickly as you do in real life but it's not a big delay, maybe a second or two. For some people I'm sure this is a big issue but for me it doesn't matter. I'm not training for a race or anything like that I'm just riding a bike in my basement and needed something cheap to use to measure how I was doing. It definitely accomplishes that and is close enough to accurate that if I were to get more serious I wouldn't be in any rush to replace it. That said, the slight delay is the reason it gets 4 stars instead of 5. Overall I'm really happy with this product and would recommend it to anybody for any stationary bike, and to most people for a road bike. For the price you can't beat it!

I like to gather data about my bile ride so I can improve my performance. I wanted a relabel way to measure my cadence. This seemed to simple at first. Just a small oval disk that you stick on your crank arm. I was pleasantly surprise by its performance. It works good for me. Some review say that they are getting intermittent readings. I think it might be an issue with their phones settings. I have been using this for 5 months almost everyday and it works great! I had a Polar wireless rig on my bike before and that system kept giving my intermittent and jumpy readings (cost almost $400) just sold it on eBay for $50 :(. Wahoo has their own app for your phone that will gather data from their sensors or others. Their app is compatible with Ant+ and Bluetooth sensors. I was happy with their app and use it for my bile. Their Apple version is better than the Android. More features. Unfortunately I have an Android. Overall I have to say I am happy with the sensor. It was easier to set up then the polar sensors and work better. The polar sensor requires a magnet and sensor. The Wahoo cadence is just a little disk no magnet needed. Took less that 5 min to set up. My set-up: Samsung s6 Gamin HRM (Ant+) Wahoo Cadance GPS speed Please let me know if you found this review helpful

This is a review for just the cadence sensor. I don’t do a huge amount of super-intense high performance training, but I like to improve my biking (as well as running, weight-lifting, and everything else) here and there with as much training as possible (while still enjoying the hell out of my rides – something I couldn’t do if I was thinking about just training all the time). One big way to increase performance is to increase cadence – the RPM’s of your pedal strokes. So, thanks to adding it to my Amazon wish list at Xmas time and my beautiful wife – I went with the Wahoo RPM Cadence Sensor. I like the Scosche RHYTHM Bluetooth Speed/Cadence Sensor fairly well that I have on my training bike indoors, it’s not the absolute best but it does the job. I don’t particularly like how it looks on the bike, how it could be prone to getting knocked while riding outside, and it is both the speed and cadence sensor and for my outdoor use I only really needed the cadence sensor part as my watch has GPS for general distance and speed. So after a bunch of research I decided on the Wahoo RPM Cadence Sensor. You will similar find clones out there, some cheaper and some with less ability to connect to other devices, less compatibility perhaps, and you will also find other sensors for cadence/speed that are bulkier and more visible/in the way (like the Scosche RHYTHM speed/cadence sensor). One of the reasons I bought this was I had a little experience with the Wahoo Speed Sensor, which I had bought for my wife’s bike. It is similar visually, but attached to the hub instead of the crank arm of course. And it seems to work excellently. I also regularly use their Wahoo Fitness app (which works great with other sensors of all kinds) and they do sell both the Wahoo Speed and Cadence/RPM sensor together as a package, the preceding links also will show the sensor set with the bike computer option, as well as the heart rate monitor option. And of course it gets generally good reviews. The Wahoo sensor is a small module-like sensor that has both Bluetooth and ANT+ and attaches to the crank. There’s no magnet, unlike some of the old style cadence sensors and this one is JUST for cadence (see my links above if you are looking for speed also). Like your smartphone’s motion detection; this uses a gyroscopic sort of chip and likely accelerometers. It’s small, unobtrusive, made of matte-black plastic, waterproof (IPX7 – waterproof to about five feet), compatible with most anything that will accept ANT+ or Bluetooth 4.0 signals (it’s so-called low energy Bluetooth) – most biking phone apps (Android or iPhone), bike computers, watches, etc. The battery lasts a long time, the company says a year, and is a replaceable, standard coin cell type CR2032 battery (no having to recharge it all the time) so you don’t need to buy anything special. And the device has a one year warranty. For the bike weight weenies out there it weighs in around 7 ounces and is only about an inch and quarter wide and an inch tall, and three-quarters of an inch thick. So it’s thin enough to fit on pretty much any bike. If your crank arm is closer than that – well, I guess you’re out of luck for mounting it to the crank arm but you instead can attach it to your sneaker (more about this later). I have seen a few reviews where people mentioned that it would not fit their crank arm because of clearance – but wow; that’s close. Just like Wahoo’s website itself the box it comes in is slick and modern but not garish, each part packaged in plastic bags. Included is the sensor; with the battery installed, the gel-like rubber mount holder, zip ties, shoe mount holder, 3M double-sided tape, and a quick start guide and an important product info guide. You may notice that as soon as you take it out the little occasionally flashing blue light will come on, indicating that it has detected movement. Is the battery worn down a bit from all of the movement as it was shipped to me? Possibly, but unfortunately there’s no easy way for Wahoo to stick one of those little plastic pieces in between the battery contacts and the battery to keep it from discharging; as it needs to be waterproof. No way to do it without removing the battery for shipping. My advice is to just check your battery level in the Wahoo Fitness or Wahoo Utility app – more about the apps later. The included installation instructions were okay, pretty generic but really there’s not much that you need to figure out. But I decided to double-check the installation instructions on their website just for fun. Installation is one of three ways. Unfortunately I can’t review the first two methods as I did not try them, but I can go over them quickly and review the last way. Using the heavy-duty double-sided tape that is included, the sensor can be for attached directly to the crank arm. The tape is the good stuff. Yet… I’m not sure I can bring myself to trust it, despite a lot of good reviews by both road cyclists as well as MTB’ers. A lot of people use this method, lots, yet I decided to go with the zip tie option. But the double-sided tape course is probably the easiest and fastest way to attach it, you just have to make sure that your crank arm is clean and place the double-sided tape on it, stick the sensor to the other side of the tape, and give it a good squeeze and you’re all set. On a side note – while writing this blog entry I came up with a great re-purposing for the double-sided tape, rather than chucking the tape or keeping it in a drawer – my Cycleaware Reflex Bicycle Helmet Mirror needed new double-sided tape from when I transferred it to my new Giant Horizon Helmet. Rather than buying the manufacturer’s tape or a generic brand I used this tape from the Wahoo sensor; it worked great so I can attest to its strength even though I didn’t technically use the tape for it’s intended purpose. The second option for mounting is a plastic mount with holes for your shoe laces to go through, so that it can be mounted to a shoe or sneaker. You slide the sensor into the mount, lash it to your shoe laces and you’re done. Good option if you are going to use it on multiple bikes, or a bike trainer at the gym operhaps. The last method for mounting the cadence sensor is to use the small rubbery gel mount that the sensor just slips into, like a glove. It’s very secure, and the mount has a slot at either side for the included zip ties to go through. So you have two attachment points with this mount, which I like. Attaching it was simple, though as I mentioned above if your pedal crank is really, really close to any part of your bike when you are pedaling it may not clear it, I would guess that this would be very few bikes and the rubbery mount adds next to nothing to the thickness of the sensor. I’ve read a few reviews from people who had a problem with their crank arms being too close and had to return the sensor, you’ll need to do a quick check of the distance that your crank arm clears your frame at any place. This mounts on the non-gear crank arm, by the way. It’s very inconspicuous, yet if you want to see the colored indicator LED through the gel mount it’s pretty easy to (from the opposite side of the bike). In the daytime you can still see it, though of course you have to get fairly close if it’s in bright sunlight. Mounting was quick and easy, with a quick snipping of the zip tie ends. I may cut off and redo the zip ties a bit at some point but it is very inconspicuous. So one way or another you should be able to get it mount and work with pretty much any bike – road, mountain, hybrid, gravel, cyclocross, recumbent, etc; people even use it with spin bikes. Pairing to my Garmin Forerunner 620 was simple too, exactly the same as connecting any other sensor. The pedals have to be rotated a bit to wake the cadence sensor up, once you see the light come on you can stop rotating it. I then set up current cadence in one of the fields on the first data screen on the watch along with speed, heart rate, and distance. A secondary data screen that I can switch to shows lap cadence and average cadence. The accumulated data after a ride is downloaded by Garmin Express on your computer or phone, showing your cadence along with any other sensors and your stat. Again, setting it up was simple and quick on the Garmin Virb (see my Garmin Virb Review here) too, with the cadence screen showing up automatically once I scrolled to it on the dashboard. Once in use it shows a line graph, the amount of time as a reference, current RPM, highest RPM and average RPM. Just like the Forerunner, this data can be downloaded, exported, etc. Unfortunately the Virb only displays the data from one sensor at a time but the display of the data is more useful than the Forerunner in the form of the line graph. A simple pairing on the Wahoo Fitness app was equally as easy – in this case you use the app itself, not your phone’s Bluetooth pairing (make sure Bluetooth is turned on though). The real-time cadence display is a bit simpler on the Wahoo app but shows a line graph on the summary screen after you finish, again you can export or upload all of your data to the most popular fitness/biking logging websites through the app, as well as download raw data in various formats. Starting out for a ride requires the sensor to come out of sleep mode, which only takes a few seconds at which point it starts registering after that slight delay. Likely you won’t even notice this as rolling your bike out of the garage or moving it a bit is going to bring it out of sleep, but some devices make take a few additionally seconds to start logging the cadence in real-time display. Some reviewers have mentioned drop-outs and spikes and such but I see none of this, it seems to be consistent. And also accurate, when compared to manually counting my pedal revolutions while using a clock display. I saw no difference in RPM’s between my manual counting and the display, and both the Virb and the Garmin Forerunner show the same cadence. I don’t normally use the app for road biking but it seemed to also be the same when I did a quick test. While the cadence seemed to be accurate and consistent across all devices there is a lag between the actual physical cadence and the display of it on the various devices. From what I have read this is not uncommon for A) this device and B) other similar devices and watches, bike computers, what-have-you. Some don’t seem to have any delay, some may be a second or two, some may be a bit longer. I think the Wahoo Cadence Sensor works great, but this is one area where some people may find it annoying or something they wouldn’t use. Not for me though; even though I may sometimes train hard I’m not going to win any races nor expect to so my training and use of cadence doesn’t have to be exactly spot-on to the microsecond between actual cadence and displaying of it on whatever device I am using. And frankly – if you are watching it all the time you’re doing something wrong and you probably haven’t developed a good feel for keeping the consistent cadence that you should be maintaining anyway. With the Garmin Virb the lag for RPM update is around five seconds, with the Garmin Forerunner 620 it is around four to four and a half seconds. The Wahoo app is around the same range. The differences in lag times made me wonder if the lag is a combination of the sensor’s processing and transmitting of the data as well as the receiving device’s processing, logging, and display of the data? If it were just the Wahoo Cadence sensor’s lag it should be somewhat consistent across all devices, I would guess. Does the lag show up in the raw data or is it only in the real-time display on the devices I am using? A look back at the data after a few rides using a quick, totally down-and-dirty, visual comparison between cadence and speed while corresponding the data points to fairly level riding seems to show that the data logging itself is NOT lagging, just the real-time display of it on the devices. This, of course, is subjective without some really serious number crunching and heavy duty comparisons I believe. Moving on…some people have mentioned spikes and drop-outs in sensor data, but as yet I have not seen anything like that. Occasional spot-checks using the clock on my Virb, manual counting of my cadence, and a level section of road and comparing it to the cadence from the sensor by displaying it at the same time on my Forerunner seems to show good accuracy every time. Like all wireless devices there may be the possibility of interference in many forms, and possibly slight incompatibilities, bugs with certain devices, and things along those lines. I have not experienced any of these. One thing that could help solve any problems mentioned above, as well as being something that you should do anyway – is to make sure the firmware is updated. This goes for all of your devices and sensors too! With the Wahoo RPM Cadence Sensor you must use the Wahoo Utility app to do this. It’s pretty easy and fairly quick, make sure you turn your pedals a bit when the app starts up to wake the sensor. Both with the help of the Scosche RHYTHM Bluetooth Speed/Cadence Sensor (which I reviewed it in this post) on my trainer bike and the Wahoo RPM Cadence Sensor I’ve been able to increase my average cadence somewhat, to an average of just under 90 RPM (outside real-world cadence), and am still working on it. One of the interesting things is comparing cadence while indoor biking on a trainer to cadence while outdoor biking. Outside I coast and take micro-breaks in my pedaling as well as decrease cadence a bit going up hills, stop for this or that thing, etc – inside not really yet I am burning comparable amounts of calories over the same time period while doing each. I believe that this is fairly typical of indoor trainer riding versus outdoor real-world riding – you tend to not take any of those ‘normal’ resting periods, coasts, and slightly lower cadences that you would get while on hills, fighting the wind, and other real-world differences. It’s certainly been a worthwhile purchase for sure, and very useful (and very unobtrusive) addition to my cycling. So summing it up about the Wahoo RPM Cadence Sensor – for me it works great, and for the price it is a great addition for my bike training. I have had absolutely no problems or issues with the sensor so far, and while I would like the real-time display to have perhaps slightly less lag it is really a non-issue for me. For the price, and for how well it works and what it does I don’t think it can be beat – unless perhaps you are a pro.

It has helped me determine my general cadence but it dropped connection so many times right out of the box the stats aren’t very useful. After about 200 mile it quit working altogether. Since I’m past the return date I emailed Wahoo. They replied immediately with some steps to try. After replying that they didn’t work they again, immediately emailed me that they are sending me a replacement and to expect a tracking order within a few days. I’ll reserve my opinion for the RPM Cadence Sensor until I get to try out the replacement but with the success I’ve had with my Wahoo Tickr and their quick response to this issue my opinion of Wahoo is they are a first rate company. Update: wahoo replaced the unit and it works as advertised. Happy Customer

The sensor worked perfectly the first couple weeks. After that, there have been repeated connectivity issues. It connects intermittently before going out for a ride after Bluetooth re-pairing. The times that it does pair, connection is lost shortly into the ride. I use a Samsung S24 Ultra with the Cadence app. I have confirmed that the sensor is only paired through the app, not directly to the phone. I have replaced the battery and have reset the sensor. This product is clearly defective and now beyond the return date. I also have the Wahoo speed sensor and it works perfectly.

Afdekklepje valt eraf. Batterij was leeg bij levering.

Lo uso para rpm en bici de spinning en casa, que no tiene computadora. Se conecta a la aplicación wahoo en el celular y es muy rápido en detectar cambios de velocidades en un rango amplio desde más o menos 50rpm a 120rpm.

Good sensor with enough (in my perspective) mounting options. One more small plus point is, that the sensor get active also from vibration (not only when you pedal) and the computer can find it much quicker. Just a small convenience.

Den fungerar precis som den ska. Fick dock byta batteri efter bara 1 timmes användning. Eftersom den aktiveras genom att man skakar eller rör den så misstänker jag att den har aktiverats flera gånger under hantering och transport, därav det tidiga batteribytet. Det bästa vore att man fick sätta i batteriet själv.

Reçu, installé et testé aujourd'hui sur un VTT! Installation ultra simple, reconnu instantanément par mon GPS Wahoo et l'application Elemnt, résultats pris en compte dans l'appli Forme iPhone, pas besoin d'installer d'appli supplémentaire. À voir dans le temps, mais dans l'immédiat je suis ravi.