BONTEC TV Wall Bracket, Extra Long Articulating Arm for 32-75 Inch TVs, Full Motion TV Wall Mount, Tilt, Swivel, Rotate, Universal Wall Mount, Up to 60 kg, Max VESA 600x400mm, Space Saving

I have used this bracket to put a Samsung 55” tv in a corner of a bedroom. Bracket is very heavy but comes with a template which was a godsend to make it super easy to put up. Item bits perfectly and has held my tv for over 6 months with no issues. Has large bolts to attach it to the wall. The price was higher than some other brands and versions but this one fit my needs perfectly with the large reach it has. The bracket is easy to move in and out but still feels very sturdy even when extended.

This is a quality item, make no mistake. It came with a good set of instructions, all the bits you could need ( almost) and ( apart from the weight) was pretty easy to fit.Once up it looks great, it is SOLID. It is easy enough to move, but stiff enough that it will never become loose or move by itself. Criticisms, ver few but I'll try. In the instructions it doesn't actually state what drill size to use ( for concrete/brick ). It is in fact 12mm, I made a pilot hole with a 5mm bit for accuracy as the 12mm bit is a bit wieldy.The enclosed template works well, but make sure you know which 6 holes you will be using. A tiny point was that when adjusting the tilt, if you take it to the max, the enclosed spanner won't fit the bottom nut! Bit of an oversight, but an open ended 10mm spanner will do the trick. Overall it is excellent, well worth the money, highly recommended.

Very good product was a bit scecptical having never had a mounting bracket tv before was very surprised when it was delivered and unpacked, how robust the product looked , easy to mount , if you are installing it at height make sure you have an extra pair of hands to take the weight as it is a bit weighty on you own. Just one point to take note of when you extend it to full capacity it extends more than what I thought it would but that's not a bad point by any means. When closing the product back to the wallet it can be a little stiff. Otherwise it is worth purchasing.

Heavy duty wall mount. Works well and is very easy to install. Just pay attention to the type of wall you mount it to. The instructions are very clear on this. Good wide range of adjustments. It a bit stiff to move. Could do with being a little easier to position. I mounted a 50 inch tv to the wall, it holds the TV very well. Good functionality with wide adjustment range. Very complete kit with lots of screws and mounting washers to suit the back of most TVs.

Just mounted it now. Perfect. Very sturdy, looks great. Long arm, tilt & rotate very useful. All very easy to fit, comes with everything you need aside from tools for drilling etc. also comes with a template if you're not great at marking. You will need a 12mm masonry drill bit which most sets don't come with, so order one on here if you don't have one. Very secure, exactly what we needed. Great value for money.

This is a superbly constructed TV bracket. I have a 55" Sony TV on mine and it barely deflects a millimetre at full extension. My TV is at 90 degrees to the wall and there is still at least 30cm between the side of the TV and the wall. I would guess that there would still be room if it was a 65" TV too. The hardware supplied is great. I have old flint block walls that can be granite hard and powder soft at random points. I used a 10mm masonry bit even though they were 12mm wall plugs and that worked fine. If you're confident the wall you dril into is a modern, uniform material then use a 12mm bit. Anyway, the 6 supplied bolts and washers work very well. Supplied with the bracket was the usual collection of bolts and washers for attaching your TV. It was a bonus though to have an HDMI cable and several velcro cable ties supplied too. The only issue I had was when it came to levelling the TV once in position. No matter how perfectly level you mount the bracket to the wall, the TV will always come out of level when at full extension. This is why there is a +/- 3 degree adjustment to compensate. Now, your bracket may be different, but the four Allen bolts you loosen to allow adjustment on mine were tightened in the factory to an exceptional torque rating! I'd never rounded off an Allen wrench before...I have now! Perhaps the quality of the supplied wrench was below par but, even so, my fingers had a wrench shaped indentation on them for quite a while afterwards. I had to use a Wera set I have and my cordless drill to loosen a couple that were too rounded off to do by hand. So, I suggest you loosen those 4 bolts before you've mounted it to the wall. It will save a lot of bother. In summary, then. A superb product you can trust your precious and expensive gogglebox with. Just check the torque on those bolts first. Recommended. :)

This is INDUSTRIAL. My wall will come down before this bracket comes down. It came with a paper-guide and a multitude of bolts. When I first opened it I was overwhelmed why the sheer size, amount of bolts and weight of the item. This could probably hold one of those old fat-backed TVs if the right fittings were provided. The weight of this made it a 2-person job. I was horrified when my sons TV came the same day we put it up and weighed nothing at all. I thought what was the point of getting this industrial bracket to hold a bloody feather? My real reason is my youngest son. He has ASD and is the most destructive and dangerous child you could ever meet. If he decided one day that he wanted to climb up it and bounce, it wouldn't move. My only advise to anyone purchasing would be to make sure the height if the tv is where you want it as the tilt radius isn't the best. We attached ours too high up but we deal with it because moving that thing would be impossible, so make sure you find where you want it and dont want to move it anytime soon in the future because it would be one hell of a job. The instructions were clear and easy to understand.

Great heavy sturdy bracket with correct tools used to install bracket. Easy enough to fit due to template and included hardware with the selection of bolts to fit. It was good value for money. I would recommend this hardware for the putting tv’s on the wall.

Contacted them with a concern, they told me to continue with installation, TV now flickered randomly after installation. Messaged them this event and they stopped responding.

Este brazo para TV es resistente y cumple perfectamente con las expectativas. Sostiene la televisión de forma firme y segura, transmitiendo confianza desde el primer momento. Además, incluye todo lo necesario para la instalación, lo que facilita mucho el montaje👍

excelente calidad, instale una tv de 70 pulgadas y no se colgó nada. ya viene armado, solo hay que empotrarlo a la pared

Extra

Quality item. Very happy.