H4 9003 Canbus Decoder, Anti Flicker Harness, Resistor Decoders Error Free

this device solved my LED headlight flickering issue, very easily installed, i read reviews that the device didn’t solve their flickering issues but it did mine. maybe it’s not for every vehicle as advertised but it worked for an ‘08 Patriot.

First off. Only a handful of people stated the type of vehicle they are buying these for so I was a little iffy. But I have a 2016 jeep compass. And my led headlights kept flickering to the point I just wouldn’t drive at night. It has stopped ALL flickering. It was compatible with my jeep. The product seems durable but not sure yet time will tell. The only thing that would have been better is if it came with longer zip ties. But other than that it fit and done it’s job!

This might be the worst product that ever says it will fix it it does not fix the lights from Stroing in a 2012 mini Cooper don’t ever buy it for that it won’t work

This worked great! My Fog lights would turn on, but also turn on my high beams at the same time. So if I needed my fog lights while running my low beam headlights, my high beams would turn on. This decoder fixed the problem. I can turn my fog lights on and off with out any problems. My high beams turn on when I need them. Everything works normal like it was designed by the factory.

Gadt shipper ..and good product 👌

Nice construction and easy install but it did not 100% eliminate my bulb out warning on the dash from installing LED fog lights. The warning light would come and go depending on the day.

These fix 2009 honda drl issues. Must have.

Worked for my 2002 Toyota Tundra. LED headlight bulbs caused the fog lights to not work and when the fog light button was pressed the high beams came on and there was no high beam indicator light on the dash. I installed 1 as other people stated you only needed one on the passenger side headlight. This did not work! I would still get high beam with the fog light button from 1 headlight. I ended up installing both and it resolved my issue. Only negative is that the cord length is very short approx. 5" which doesn't give you a lot of options to mount the resistor. I was able to use the frame above the headlight with some zip ties, but it is a tight fit. Wish the cords were at least double in length.

I installed this decoder to fix a slight flicker I was getting in my high beam bulbs when they were running as daytime running lights (DRLs) on my 2007 Toyota Camry. It worked exactly as expected — the flicker is completely gone on the side where I installed the decoder. To test it, I recorded a short video: the left headlight (without the decoder) still shows a faint flicker, while the right one (with the decoder) is perfectly stable. The difference is clear. If you’re upgrading to LED bulbs and notice any flickering, especially in DRL mode, this little unit is definitely worth it.

Solociono el testigo de las luces en un focus 2012 MK3 lo único malo es que es un lío volver a montar todo los estaré probando un tiempo si fallan actualizo esta reseña

This solved my Canbus error in the VW. Much preferred over the low tech load resisor solution (if it works which it didn't in my VW). Just gets warm in operation and therefore does not require any special mounting considerations. Connectors and wiring are high quality and very rugged.

Las luces funcionan muy bien, sin esto se apagaban de repente, y ya no ocurre eso

Me sirvió para el buen funcionamiento de luces led en una Jeep Compass 2016.