Spotter V2 FPV Camera and Transmitter Kit, 5.8G Micro AIO Cam, OSD, Integrated Mic, FOV170 Degree 700TVL, 40CH, 20MW-200MW Adjustable

It's a great camera with decent enough video if you're starting out, plus it's really cheap. Other cameras require a separate transmitter for the camera. Just connect to an empty receiver channel and it works and transmits just fine. I recommend getting this plus the sologood monitor because they connect easily and it's a cheap fpv combo to get your feet wet and not break the bank. I'm using it on a turbo timber evolution 1.5m.

This thing can take a beating. I was going about 45 mph with my 1/10 scale RC truck, slammed on the brakes, and forgot that I had adjusted the front shocks to full stiffness on the concrete road. It flipped three or four times, bent the heat sink on the camera, and knocked it off my rigged mount, but it was fine. It still works like new. For a new buyer, I thought the antenna would break easily because it looks fragile, but it can take a beating. I have rolled it more times than I can count, and the antenna just bends right back into place with no problem. I plan to buy more of them in the future. Things are rock solid and very durable.

Overheats too much Hey sorry my review was unfair, i came up with a remedy using a custom made cooling pod with an optimized profile and that did the trick just fine. I would totally recommend this. I decided to carefully remove the chasis of the module, and gently integrated into my new des9, and the cameras actually stayed pretty decently cool, in fact ive even had to start conceptualizing a method to balance the cooling to avoid superchilling the poor thing to death, yikes 😬 But honestly i can defend this manufacturer confidently by saying theres always a remedy, its all about how you integrate the components into your setup

So I used the Camera on a 1/10 scale rc crawler. Works fine for about 10 minutes. Then it heats up to the point I can’t touch it. I put an ice cube on it and it melted the ice cube. Also the range isn’t great, got about 50 ft of range.

I have purchased 9 different camera/transmitters and this is the only one that performed great. the video is sharp and clear tested up to 150 yards and the audio was clean at the same distance . It is also the only one that was easy to mount. I added a small cooling fan to the heat sink as the unit was mounted inside my Flywing UH-1 V4 450 helicopter not in the wind stream. Note: the fan you will need is 15mm square. I loved it so much I ordered 2 more ,one for my P51 and one for my P38 Lightning . I recommend this unit for tight areas like cockpits ,looking through the windshield . RMC

Great camera, very durable and easy to plug up to my RC truck, plane, tank. The servo plug makes moving from one model to another very easy. Like all AIO cameras, this one does get hot. Make sure the heat sink can get a breeze.

A clear image I love the analog on it and for the price I really enjoy it.

A decent camera in a small package...Yes...it's a all in one(AIO)camera transmitter and antenna inclosed in a nice little package...weights almost nothing...the power, and transmitter channels are changeable but there is nothing on the camera itself to allow you to see what power or channel your on...you must be connected to a monitor to see the on screen info...This camera is perfect for a entry level FPV pilot or RC car/truck person looking for a more emmersive experience/view...like being in the driver's seat of your vehicle....Just a caution...the camera does get hot to the touch when powered...this is normal...Is it with the money? I think so...it's a complete package so nothing else is needed on the camera side....to record your experience...a DVR screen/reciever is needed to view your experience...a smart phone with a OTG reciever works well...one last thing...it states there is a integrated mic....I can't get it to work...othere than that....no issues

Jag hoppas att mitt barnbarn kan se vart han kör med sin rc bil

Super facile à installer

Perfekte Camera für Boot Auto etc…Wird heiß, beim stehen …Sehr gutes Bild !

I put this on top of my basher RC car with the included velcro. At one point I went to hard and rolled the car and ripped the camera off. Stuck it back on and it kept working. Then I drove through a puddle and soaked it. It stopped working. I dried it out and it seems to be good as new. So it's very tough. The image quality is decent when paired with eachine ev800DM goggles. Can be tough to make out any fine detail, but good enough to have a lot of fun racing around

Good low res camera. Gets hot! O used a rechargeable 9 volt battery to power it