Mid Fire Specialty Series - Sample Pack

Took a bit to figure out but fun colours to play with. Not sure I will purchases these glazes again.

Arrived with seals missing & open with bottles half filled. After mixing thoroughly with a paint mixer some product was thick & muddy & some water thin with a hard block in it that would not reconstitute. Replacement arrived. Bottles were sealed but same consistency issues. Fired on product as directed. Results are a flat matte dull color with inconsistent coverage. I have wasted clay, and most importantly my time, for an ugly outcome. I feel the product was temperature abused. I would like a full refund for both batches and a replacement. I do not feel I should have to waste any more of my time on a return.

Colors did not turn out as pictured. Fired at cone 5. Very disappointed. Thats the life of pottery and glazing.

I personally love this series. I ran into a few glaze issues based on different test rounds. - The glaze is thin, so ideally, dip the item so it gets full saturation or 4 coats. -Works well for the inside of cups/bowls more consistently because of the heat distribution -Often browned unevenly on my early pieces leaving undesirable outcomes on my pottery. -I used a clear celadon glaze over these after some trial and error. I found this helps with the inconsistencies. *View photos above for test pieces

Not a fan, some of the glazes were dry, some too runny, very inconsistent. Fired to 05, definitely not the color pictured. And no " glaze" to the piece at all. Was a summer project for our grandkids, disappointed to say the least