ECCPP AC Clutch 2003-2008 for Dodge for Ram 1500 2500 3500 4000 5.7L

I bought this clutch kit for my 2008 Mazda 3 with a 2.0 engine, and the experience has been excellent. It's an ideal solution if you're looking to save money without sacrificing air conditioning performance. Key points: Perfect Compatibility: It was the exact replacement for my vehicle's compressor. It fit without any modifications, making installation very easy. Excellent Quality: The materials feel robust and high-quality. Once installed, the compressor engaged smoothly and efficiently. Guaranteed Savings: It's an excellent alternative to replacing the entire compressor, solving the problem directly and economically. Verdict: If you have a compatible model (2004-2009), you can buy it with confidence. It's an excellent quality replacement part that performs its function perfectly and ensures your car's air conditioning comes back to life.

Fit my 2000 Ford Focus 2l DOHC. Did not have to remove the compressor, just the drive belt cover bracket and lots of tapping with a hammer to remove and reinstall the press fit magnet assembly and pulley+bearing. The magnet has to seat all the way or the pulley won't spin freely once installed. Check the gap between the collar on the magnet and the compressor. None of the mating surface on the compressor should be visible. Even 0.5mm is too much. The clutch plate assembly is threaded larger than the included bolt, which was initially concerning, but this part actually doesn't have to be threaded at all. I used both of the included washers to make the space for the clutch plate to be free of the pulley. The washers go between the clutch plate and the compressor shaft. The pulley seems nicely aligned with the belt path. Quick test around town and it seems to work!

The snap ring the holds the coil pack? too thin. Half the thickness of OEM. The snap ring that holds the pulley? too thick. Twice as thick as OEM. The shims on the actual clutch part? Too thin. Wish I had checked this part earlier before I failed to check that it spun freely and burned it out during the test start. The connector on the end of the positive lead? Completely wrong. I had to pop the socket pin on the end of the wire out of the connector, do the same for the original coil, and put the original connector on. I had cold air for like, thirty seconds testing turning it on and off before the clearance became an issue through the off cycles and it began smoking out. I'm ordering OEM, and returning this crap as soon as I can get it off. Again, the only three things that were right were the core components, and after seeing all the hardware they came with, and with even the coil connector being wrong, I don't even know for certain that they're within spec, I might go down the road with them only for the bearing on the pulley to sieze or explode and either break or dismount my belt. Thanks a ton, I really enjoyed putting in the work only to come out possibly worse off than I started.

Fit my 2017 Chevy Tahoe 5.3L. Was a tough install getting C-clips off. Took care of a squeaky worn compressor clutch. Working smooth now and no squeaks.

Works great glad I went with this brand

Great quality and fit perfectly on my car, way better than spending close to $100 from a car part website. very easy and straightforward installation. best $30 i spent to get freezing cold a/c.

Fit, value, compatibility, cooling performance, and operation are superb. Like others have mentioned, the drive plate requires additional shims IN ADDITION TO the ones included with the kit and the factory ones. I used a small split lock washer in conjunction with all of the shims to achieve the necessary clearance. I was aware of this challenge before I selected this particular kit and it wasn’t a problem.

Installed in an 06 ram 1500 and even with the battery disconnected the clutch is engaged. So my ac works but is always on... unfortunately I took too long to install to send it back for another.

No me fue satisfactorio la calidad del producto es de origen chino y no viene especificado en la descripción del producto que ofrecen y he batalado mucho con marcas chinas.

Exelente al 100

Works excellent.Only problem was that I had to borrow snap ring pliers to remove and install the inner unit.

Lamentablemente no me sirvió por detalles de descripción, pero se ve de buena calidad y precio .

Installed and working. Very good