GKU Dash Cam Hardwire Kit, Type-C Hard Wire Kit, Mini-Fuse, 3.5 Meter USB C Port Wiring & Low Voltage Protection, Converts 12V-24V to 5V/3A, Car Camera Charge Power Cord Kit for 24H Parking Monitor

Quite surprised how easy this was to fit. Simple use a volt meter to find blue fuses (15A) where one is live without the ignition turned on and the other only goes live when ignition is on. Simply replace the kits fused wire with each fuse. Find an earth / ground point and screw thet other wire to the metal of the car. Done. I faffed about double and treble checking because the instructions didnt tell me that their wires with fuses on were 15A fuses (I know nothing about cars) but a quick check on what the fuses were using AI and job done. I could have done it in 3 minutes had I just replaced fuses by the colour (Blue). Anyway, the cable length is plenty and I simply plugged into my GKU e200 dash cam and that was it.

I recently installed the GKU Dash Cam Hardwire Kit (Type-C, Mini-Fuse, 3.5m Cable, 12V-24V to 5V/3A Converter) on my 2012 Ford Fiesta, and I have to say—it works flawlessly! Installation & Compatibility 🔧 The installation was straightforward, even for someone with minimal experience in car wiring. The 3.5-meter cable provided plenty of length to route neatly along the trim and reach my dash cam without any exposed wires. The mini-fuse tap fit perfectly into my fuse box, and the grounding wire was easy to secure. Performance & Features ⚡ Constant Power & Parking Mode: The kit provides a reliable power source, allowing my dash cam to stay in parking mode without draining the battery. Low Voltage Protection: One of my biggest concerns was battery drainage, but this kit automatically cuts off power when voltage drops too low, ensuring my Fiesta’s battery stays safe. Stable Power Output: My dash cam now runs without any interruptions or sudden shutdowns, even in extreme temperatures. Clean Setup: No more dangling wires from my cigarette lighter port—this hardwiring setup makes everything look neat and professional. Final Thoughts 💡 If you're looking for a reliable, easy-to-install hardwire kit for your dash cam, the GKU Dash Cam Hardwire Kit is a fantastic choice. It works perfectly on my Ford Fiesta 2012, and I highly recommend it for anyone who wants 24/7 protection with a parking mode feature. ✅ Pros: ✔️ Easy installation with clear instructions ✔️ Includes mini-fuse tap for seamless integration ✔️ Low voltage protection prevents battery drainage ✔️ Long cable for flexible routing ✔️ Provides stable power for dash cams ⭐ Final Rating: 5/5 – Highly Recommended! Value for Money!

Not used it yet but the kit looks OK, I'm still not 100% sure it will work on my car I've not checked the fuses yet, However it was listed for my vehicle.

Made hard wiring the dash cam very easy

The kit looks good enough. I would have installed it by now if it had come with any fuse adapters. The description says: *Note: The fuse adapter of this hardwire kit is mini-sized. If your car doesn't fit mini-size, search B0CTX8CMY4 for our another kit with four different sizes: Low-Profile Mini, Mini, ATO (Regular), and Micro2." There were no fuse adapters in the kit I received. Fuse Taps are Trivial item, but kit is useless without them. Ordering some from another supplier on Amazon, hope they as good as GKU own...

Does exactly as advertised and allows my dashcam to be powered when the ignition is off. There is a Video link on a QR Code to give you a guide for Installation so was very easy to do. Cable length is perfect and easy to fit in under trim pieces.

3 reasons this kit is useless, 1- the fuses are not replaceable 2- fuse amp are not specified so how do I know which fuse to put them, imagine I put them a fuse slot with 20amp and this hardwire could be 5amp. It would blow and mess up everything. 3- for example TOYOYA USES mini fuse, how would you fit this there ? in the demo video for tgis product the person is hiding the fuses with multimeter and you can see kind of what he does, where he touches a live fuse and shows the multimeter reading but when he puts the fuse he uses an already empty slot. Fooling people. I do not trust this kit at all, for £20 its junk. I recommend you buy Vantrue hardwire kit where it has replaceable fuse slot. Imagine your

Happy with the item just right

Câble de 3 mètres, facile a installer en quelque minute.

Einfacher zu verlegen & anzuschließen, als ich dachte. Aber unbedingt ein Multimeter verwenden, um festzustellen, wo sich Batterieplus & Zündungsplus an den Sicherungen befinden! Die Anschlüsse sind nur für Mini Blade Sicherungen! Für ATO also reguläre etwas größere Flachsicherungen muss ein anderes KIT bestellt werden! Ich bin zufrieden damit, weil ich zuerst die Kamera DKU 600Pro nur über den Zigarettenanzünder betrieben habe & deshalb die Parküberwachung nicht nutzen konnte. Ich hoffe, dass die Entladungsüberwachung funktioniert & die Batterie stets ihren Dienst erfüllt.

Il kit funziona perfettamente e il supporto tecnico del marchio è sempre disponibile e rapido nelle risposte. È una soluzione ideale per chi vuole alimentare la dashcam in modo permanente, sfruttando la modalità parcheggio e la funzione di spegnimento automatico. Modalità parcheggio attiva 24/7: La dashcam resta operativa anche a motore spento, utile per sorveglianza continua ma è possibile programmare auto spegnimento (per esempio dopo 12 o 24 ore). - Auto-spegnimento intelligente: Protegge la batteria dell’auto evitando scariche eccessive. - Installazione pulita: Una volta montato, il sistema è invisibile e non occupa prese accendisigari. L’installazione sulla mia Captur ha richiesto qualche modifica: L’auto non aveva slot liberi e il fusibile premontato nel kit aveva una plastica troppo spessa per entrare correttamente anche se il fusibile era dello stesso tipo. - Soluzione adottata: Ho tagliato i fusibili originali del kit e utilizzato due cavi ruba corrente acquistati separatamente. Una modifica semplice, ma da tenere in conto se si ha un’auto con spazi ridotti nel box fusibili. Consiglio extra: Per un controllo totale, consiglio di aggiungere un mini interruttore a bilanciere nascosto sotto i fusibili: permette di spegnere completamente la dashcam in un attimo, utile in caso di sosta prolungata, manutenzione, o lavaggio auto da parte di terze persone.

top

El kit está diseñado para ser conectado directamente en porta fusibles vacíos con corriente. Lo cual, fue rápido y muy fácil la instalación en mi vehículo. Previamente comprobando las corrientes con un multímetro. Esta instalado y funcionando perfectamente sin cables ocupando espacio y enredados en las tomas de corriente. Al desconectar y abandonar el vehículo se activa la vigilancia 24/h con grabación en bucle con una tarjeta SanDisk Extreme de 256Gb. (Consejo para vehículo que no tenga porta fusibles vacíos con corriente. Es recomendable comprar dos adaptadores de fusible doble cada uno, (no incluidos en el kit) para ser conectado en el lugar de otros fusibles del vehículo)