3 Pack for iPhone 14 Pro Screen Protector, Armorite

I’ve been putting screen protectors on phones since the iPhone 3GS. Back then, it was all about InvisiShield — the kind you had to install with solution, a prayer, and the patience of a monk. Over the years, I’ve probably installed dozens, maybe more. Some went fine, others were disasters that ended in bubbles, dust, or just sheer existential regret. And somewhere along the way, InvisiShield lost its edge, like a washed-up rock band trying to reinvent itself with pop beats. Lately, I’ve been trying out different brands, most recently a cheap option that did what cheap options usually do — it looked great for about a week, then peeled up at the corners like it was trying to escape my phone. I finally had enough. That’s when I found the ESR 3-Pack 9H+ Armorite Ultra-Tough Tempered Glass and watched a YouTube short showing the UltraFit Tray install system. It looked almost too easy — and when tech looks too easy, I usually end up humbling myself. But this time? ESR proved me wrong in the best way. The Install: Flawless Victory I didn’t prep a humidity chamber or wipe everything down like a crime scene. I just had a clean table and a few minutes. I opened the box, checked the contents, and skipped the spudger entirely. For the first time in my life, I had zero bubbles and no dust on the first try. That has never happened before. Ever. I didn’t have to peel it back and try again, I didn’t have to do the tape trick, and I didn’t find a mystery speck halfway through. Honestly, it was so easy I almost didn’t trust it at first. Even better — my girlfriend, who usually spectates and provides color commentary like, “Good thing you’re not a surgeon” or “Remind me not to let you near anything fragile,” didn’t even notice I’d done it. That’s how clean the install was. Silence = success. Daily Use: Invisible, in the Best Way It’s been less than 24 hours, but I’ve been using the phone nonstop — typing, scrolling, swiping, Face IDing — and the protector hasn’t made itself known once. No weird texture, no dullness to the screen, no change in response time. It honestly feels like the phone never had anything installed. I’m picky about screen clarity. If it adds glare or makes the screen look even slightly hazy, I notice. With this ESR protector, I don’t. It’s like glass-on-glass. The coating does a great job minimizing fingerprints too — noticeably better than the bare screen ever did. I haven’t dropped the phone yet (knock on wood), but based on the feel of the glass and how solid it sits on the screen, I’d be surprised if this thing didn’t hold up. The edges are smooth and low-profile — no sharp rim, no lifting, no snagging when I slide it into my pocket. I’m mostly in office environments, but I do hit the gym daily, and I’m not worried about it holding up under normal (or clumsy) use. The Value: Triple Win You get three protectors in this pack, which is great considering how easy it was to install the first one. I don’t think I’ll need the other two anytime soon, but having spares means peace of mind. You don’t have to ration them like gold — use them when you need them, without worrying about botching the install or running out. And if you're the “tech support” person for friends or family, this is the kind of kit that makes you look like a wizard. The tray makes it basically foolproof. You could probably talk someone through it over FaceTime without breaking a sweat. Final Thoughts: If you’ve ever been disappointed by: Cheap protectors that peel up, Install kits that overpromise and underdeliver, Or judgmental stares from significant others mid-install… …you owe it to yourself to try this ESR pack. I didn’t have to fight bubbles, I didn’t have to wrestle with alignment, and for once, I wasn’t the subject of post-install roast sessions. This is the first screen protector I’ve ever installed that made me want to leave a review — and not because something went wrong, but because everything went right. ESR nailed it. Would buy again in a heartbeat.

The ESR 3 Pack 9H+ Armorite Privacy Screen Protector for iPhone 17 Pro Max offers strong overall value by combining durable, military-grade tempered glass with effective anti-spy privacy filtering and an easy, precise installation experience using the UltraFit tray. Its 9H+ Armorite glass provides excellent drop and scratch protection, and the privacy layer prevents side-angle viewing for better security in public. The trade-offs are typical of privacy protectors: slightly reduced brightness and clarity, more visible fingerprints, and minor texture compared to clear glass. Still, with three protectors included, case-friendly sizing, and reliability comparable to more expensive brands, it’s a great choice for users who want premium protection and privacy, as long as they’re comfortable with a small compromise in display quality.

EDIT: The Company has reached out to me and not only refunded but sent me a “improved” version. Touch sensitivity is perfect. So for the customer service and free replacement with a better product my review has shot up to 5 STARS. Amazing company and the protector itself is flawless. There are a few categories that make a perfect screen protector: Ease of Install Touch Sensitivity Durability/longevity Black Borders This screen protector checks all the boxes but for one. Touch Sensitivity. I thought it would be fixed with 18.0.1 but learned it wasn’t the OS but the case. I will paste the companies response below as they are aware of the issue. First.. Ease of Install. It’s so easy a child can do it. The anti dust feature should be a standard. Awesome design. Durability/Longevity. I’ve had it on since day 1 of iPhone 16’s release and so far no complaints. Liquid and fingerprints don’t stay. No scratches or cracks that I see and I’m pretty rough with my device. I travel often for work so it’s always in a bag or in my pocket with other items. Pretty awesome. No Black Borders! I am assuming because of iPhone 16’s thinner bezel that posed a challenge for many screen protector manufacturers. This is one of the few without one. The black borders increase the bezel on the others and it’s great this one doesn’t. Now to the biggest gripe. Touch sensitivity has decreased. So much so I have to type slower so the items register better. I emailed the company and it is a known issue. This is their response: Dear Mark C, Thank you for reaching out and bringing this issue to our attention. I’m sorry to hear about the touch sensitivity problem you're experiencing with the screen protector. For phones with curved edges, such as the iPhone 16 series, we apply extra adhesive to ensure easy installation and enhanced protection. However, this can occasionally result in a slight reduction in touch sensitivity. We're actively working on developing thinner, more sensitive protectors for the future. In the meantime, to improve the touch sensitivity, please follow these steps: Settings -> "Accessibility" -> "Touch" -> "Adjust Touch Accommodations“ Thank you again for your patience and understanding. We look forward to hearing from you soon. Sincerely, Leni, ESR Support Team So while I appreciate the honesty I can’t fully recommend this screen protector. Smart Phones are meant to be responsive with their screen technology. It’s so bad that I have to modify the way I type and I 2nd guess every response. I’ve tested all 3 that come with the package and all have the same issue. 18.0.1 did not fix it. I can only type fast once I take the screen protector off… If you’ve stuck with me congrats on reading through. If you don’t type fast or touch sensitivity isn’t that big a deal then go ahead and try them out. However if you are like me and touch sensitivity is a deal breaker then this is not the one.

Strap in, folks, because we're not just talking about a screen protector here. We're diving into an action-packed extravaganza that feels like Michael Bay himself took over the screen protection game and cranked the volume to 11. This ESR 3 Pack 9H+ Glass Screen Protector for iPhone 16 Plus/iPhone 15 Plus isn’t just another phone accessory—it's a full-throttle ride to invincibility! Picture this: Your iPhone sits there, gleaming like a pristine supercar, straight out of a cinematic explosion of light and tech. Then—WHAM!—your phone slips from your grip in slow motion, tumbling toward the hard, unforgiving pavement below. Cue the dramatic orchestral swell. This is the moment your average screen protector would throw in the towel, but not ESR's 9H+ glass. No, this protector stands like an indomitable titanium warrior, ready to face the impact head-on. The phone hits the ground, BOOM! – dust flies, onlookers gasp, and just when it seems like all hope is lost, you pick it up… and BAM! The ESR protector shines, unscathed, like it just walked away from a blockbuster car chase with not a scratch. Your iPhone is still pristine. The protector doesn't just resist scratches; it stares them down and intimidates them into submission. [Military Grade: Beyond the Battlefield] When they say “military grade,” they mean it. This protector could very well be repurposed to shield an armored vehicle. It's not just 9H hardness; it's 9H hardness on adrenaline. You could use this thing to deflect shrapnel in a Transformers battle! Forget swords clashing—this glass could take a blow from Optimus Prime himself and come out gleaming, while Megatron throws a tantrum in the corner. [3-Pack: Triple the Action] Why settle for one when you can have a trilogy? The ESR pack isn't just a screen protector; it's your own iPhone Avengers, ready to assemble. With not one, not two, but THREE protectors at your disposal, you’re not just armed—you’re over-armed. It's like having three separate supercars, each primed for a different mission: daily skirmishes, night ops, and—of course—your no-holds-barred stunts where you need a replacement after performing iPhone gymnastics. [Easy Installation: Like a Hero’s Suit-Up Montage] Applying this screen protector is smoother than any montage of Tony Stark donning the Iron Man armor. ESR provides you with an alignment frame that clicks your screen protector perfectly into place like a Hollywood lock-and-load sequence. It’s satisfying, it's precise, and it makes you feel like you’ve just outfitted your iPhone for its next daring mission. The seamless fit practically whispers, "Bring it on, world." [Clarity Like IMAX Quality] This protector doesn't just shield—it enhances. The crystal-clear transparency ensures your screen displays the vivid colors of a Michael Bay sunset. You know the kind: deep orange hues blazing across a skyline, punctuated by explosions. That’s how vivid and untouched your iPhone display remains with this glass; the visual quality isn't just preserved, it’s amplified. [Fingerprints and Smudges: Obliterated] The oleophobic coating is like having a force field that annihilates grease and smudges on contact. It's practically anti-matter for fingerprints. Forget wiping your screen every two minutes—ESR's 9H+ protector shrugs off oily residue like a seasoned action hero flicks away debris after a close call. Conclusion: The Michael Bay of Screen Protectors If ESR's 9H+ Glass Screen Protector were a movie, it would be a summer blockbuster breaking all the records. It would have explosions, chase scenes, and a soundtrack that pumps your adrenaline. The kind of epic spectacle that makes you want to high-five the screen. This isn’t just protection; it’s cinematic security for your iPhone, delivering drama, suspense, and an uncompromisingly happy ending. This is the protector your iPhone has been waiting for. Don’t just shield it; arm it with the ESR 9H+ protector. Anything less would be a waste of good cinematic glass.

I like how these are very easy to install and use. Everything comes in the kit that you would think you need. Even after applying the screen and needing to get some bubbles out, it’s easy to lift it and smooth out bubbles. It’s pretty strong. I’ve dropped it on concrete outside in the parking lot and no scratches. I’ve seen other people dropping on different type of surfaces and that has cracked it. Once you need to replace, it comes off all in one piece. That’s what I was concerned about, if it will come out in pieces. I’ve gotten the same cover for multiple phones for people in my family. They like it.

I’ve tried a fair share of screen protectors over the years, but this ESR 9H+ Armorite Glass stands out for a few reasons. Installation: The included Ultra Fit Tray makes alignment basically foolproof. I’ve had protectors go on crooked in the past, but here it lined up perfectly the first time. Air bubbles pressed out easily, and the edges sealed without any lifting. It was dust-free as well. Clarity & Touch: The AR Anti-Reflective coating really does its job — glare is noticeably reduced outdoors compared to the basic glass I used before. Colors on the iPhone 17 Pro Max screen stay vibrant, and the touch response feels identical to bare glass. No drag, no weird smudging. Durability: I haven’t done a true “drop test,” but after a couple of weeks of daily use (including being tossed in a backpack with keys), the protector is still flawless. The glass feels thicker and more confidence-inspiring than budget options, but not bulky. ESR claims military-grade shatterproofing, and while I hope not to test that, the build quality inspires trust. Bonus: Even though this kit is designed for the iPhone 17 Pro Max, I tested one on my wife’s iPhone 16 Pro Max — it fit like a glove and worked just as well. Nice to know it’s versatile across generations. Value: Getting three protectors in the pack is a real win. Between device upgrades, replacements, or just having spares in case of accidents, it feels like money well spent. Bottom Line: If you want crystal-clear protection that installs easily and actually reduces reflections, this ESR 3-Pack is worth it. The tray system, the AR coating, and the peace of mind from Armorite glass make it an easy recommendation.

Product is great. Easy to install. Good thing they sell a 3 pack since the first one had a few dust particles slip through (beginners mistake perhaps). Second attempt was solid though. After installation, I noticed that there is a black perimeter across the screen protector. This generally isn’t an issue but it does slightly cut off the screen at the edges. Very nitpicky but worth calling out and the reason I’m giving a 4 star review. I’m not exactly sure why it exists either but I’m sure I’ll get used to it over time.

The ESR 3‑Pack 9H+ Glass Screen Protectors for the iPhone 17 Pro Max are top‑notch. The glass feels premium, installs easily with the alignment frame, and the military‑grade shatterproof design gives great peace of mind. Once applied, the screen looks crystal clear and touch response stays perfect. One important tip: always use the full cleaning kit included. Don’t trust the “new” unpeeled covers that come on phones from retailers—there’s almost always dust or residue that you can’t see. Using the alcohol wipe, dust sticker, and microfiber cloth from the kit gives you the best bubble‑free result every time. Overall, this is a great value pack with strong protection, easy installation, and excellent clarity. Highly recommended for keeping your iPhone 17 Pro Max safe.