BTMETER BT-100 Handheld Anemometer, Digital Wind Speed CFM Meter Gauge Air Flow Velocity Tester for HVAC Shooting Drone, Wind Chill, 14℉-113℉ Wind Temperature

I picked up this BTMETER anemometer to check wind conditions for some outdoor hobbies, and it has been a fantastic addition to my gear. It’s compact, reliable, and provides a lot of data for such a portable device. • Highly Accurate: I’ve compared the readings to local weather stations, and it’s consistently spot on. It picks up even the slightest breeze, which is great for precision. • Feature-Rich Display: The backlit LCD is very easy to read, even in direct sunlight or at dusk. I love that it shows wind speed, temperature, and wind chill all on one screen. • Versatile Measurements: Being able to switch between units (like mph, knots, or m/s) is super helpful depending on what I’m doing. • Solid Build: It feels durable enough to toss in a bag without worrying about it breaking. The fan spins freely and the response time is almost instant. Whether you're into sailing, flying drones, or just need to check HVAC airflow, this tool is excellent. It’s a great value for the price and much more professional than I expected!

Love the sizing on this meter. Good to capture the full diameter of flow, not only one side or just the center, but a full flow especially from a pipe. Reads well, easy to use, and fits nice in the hand. Good meter and buy overall.

I received the unit today and was excited to try it out. The unit does a great job measuring air speed. I will use this to adjust the AC /Heat vents in my house. The downside is the thermometer does not measure temperature accurately. I compared the unit temperature read out to an accurate temperature reading thermometer and the readings were about 10 - 15 degrees apart. I am disappointed in that. I gave the unit plenty of time to stabilize by laying it across the AC vent.

We use these to test the CFM on our kilns and air dry yards for a lumber company. They work very well. They’re not terribly priced. They seem to be quite accurate compared to some of our very expensive ones within a percent which for the price is pretty good. I’ve never had a battery failure in a few years that we’ve been running them overall they were very well and it’s easy to use.

I have a need to be able to measure the flow of air and was looking for a low cost solution that I could get fast. When I saw the BTMETER BT-100 handheld anemometer I decided to give it a try. One review I read while deciding which product to buy concerned difficulty in removing the battery door. The battery door is actually very easy to remove if you know how. To remove this door you first need to remove the two screws with the provided screwdriver. You then need to pull the door EXACTLY straight out. The fit is tight so if you lift one side more than the other it will make it much harder to pull out. With the two screws out I was able to put a fingernail under each side on the part that holds the screws and pry up. If you do this or something similar it is very easy to remove. The instructions for this meter are very minimal so my next couple of comments relate to use of the instrument. The device measures temperature and the spec is +/- 3.6F. A lot of the reviews complain that the temperature measurement doesn't work. I put it in a room that is approximately 71F. The temperature on the meter was 69.9F which is within the tolerance. The important thing to understand is that it is very slow to change. It took around 30 minutes to get up to that temperature (I didn't measure it initially because I didn't know it was so slow). I am not sure why it is so slow but if this is important to you than FYI. There is a button on the meter so you can display temperature in F or C. The main reason I got the meter was to be able to measure the flow of air. The fan blades are very sensitive to air flow. Just picking up the meter causes the fans blades to turn. I don't know about the accuracy of measurement for air flow. For my usage it is more important to get a number then I want to know the amount of change when I change things and for this usage the meter works great for me. The only problem I had was I sometimes put the meter in a spot where I could not see the display. I finally figured out how to work around this problem. There is a button labeled MAX/MIN. Pushing this button toggles it between MAX, MIN and nothing. If it is in MAX mode it will continue to display the maximum value when you remove the meter from the air flow. I started to use the meter in MAX mode in the cases where I could not see the display. The main cause of this problem was the minimal instructions that the meter has. There is a timeout (to save on battery drain) where the meter turns off and it is approximately 15 minutes. When it turns back on again the units I selected for air speed and temperature were preserved. The MAX/MIN setting was not. This is a quick review that I will update after I have used it for a longer period of time if there is something else of interest to add. At this point in time I am very happy with this meter. I got it overnight free with Amazon Prime!

I'm happy with this product. For the price, it is well built and works fine in all regards. I use it for checking the wind speed around me when flying my drone. My mini 5 pro has a wind speed "limit" of 27mph. What this anemometer does for me is, after using it for a while, it's helped me remember what a given wind speed feels like without looking at it. So I just take into account that wind speed at altitude will always be more and take it from there. The device works great and seems very accurate and very sensitive. Just a note. I would like to praise the seller for their customer service. Although it says final sale and no returns, mine arrived and would not power up. I sent them an email with a short video showing them that even with new batteries, it won't power up. They were extremely nice and immediately sent me a replacement without me having to return the old one. Now that's customer service! I also like that you can mount this on a tripod. I use it all the time.

Nice little gadget for what I paid. Accuracy? Could have spent hundreds to get precise results. Fun to use. Good enough.

I’ve been using the BTMETER BT-100 anemometer mainly for checking airflow at vents and returns, and it’s been a useful little tool. It measures wind speed, temperature, and airflow (CFM), which makes it handy for basic HVAC diagnostics. The readings update quickly and seem consistent, and the backlit screen makes it easy to read in darker areas like attics or utility rooms. It’s lightweight and easy to carry around when moving between vents. It’s not a high-end professional meter, but for the price it does what you need. The only downside is the plastic build feels a bit basic, so I wouldn’t be too rough with it.

Gayet güzel çalışıyor, bu fiyata iyi ürün.

Werkt goed, nadeel het scherm is erg donker dus je ziet de meting niet. Daarvoor moet je op een knop drukken dan gaat het licht in het scherm aan. Maar dat gaat heel snel weer uit. Gevolg je moetherl verl op het lichtknopje drukken.

Vom Material her fühlt und hört es sich nicht sehr wertig an. Ist bei dem Preis aber vermutlich nicht zu erwarten. Dafür ist das verbaute Flügelrad sehr empfindlich aufgegangen sodass die Reaktion auch bei leichten Brisen einen Effekt zeigt. Ich denke für eine produktive Umgebung wird das teil nicht gekauft, für mich, um nur zu wissen, wieviel Meter gerade die Windlast beträgt reicht es vollkommen aus! Ich gehe davon aus, wenn das das Teil 3-4 Mal imJahr eingesetzt wird wird ses sein Geld wert sein. Wer es also nur si für Spass ein pasr mal im Jahr braucht wird sicherlich damit klar kommen, ab Semi-Pro einfach bei höher Wertingen Geräten schauen.

Ottimo prodotto

Medición muy exacta. También te ofrece temperatura, que también es de agradecer.